High Speed CNC Turning Center Turret Lathe with Siemens

• Customization: Available
• After-sales Service: Support
• Warranty: One Year
• Model NO.: ESY3000MH
• Type: Turret Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Inclined Guide Rail
• Tool Holder: Single-tool Holder CNC Lathe
• Power Source: Electric
• Controlling Mode: CNC
• Automatic Grade: Automatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: GS, CE, ISO 9001
• Condition: New
• Control System: Fanuc, Siemens, Mitsubishi
• Spindle: A2-6,A2-8,A2-11
• Chuck: 6,8,10,12inch
• Tool Turret: Vdi or Bmt
• Motor Power: 11,15,18.5,22kw
• Transport Package: Plywood Case
• Specification: 5450*2210*2100
• Trademark: Oturn
• Origin: China
• HS Code: 8458110090
• Production Capacity: 1000/Year

Product Description

 

 

Product Description

 

The machine adopts an optimized 30-degree inclined bed structure design, and has high precision, super rigidity and excellent cutting stability. High-strength HT300 cast iron one-piece strong structure bed, the application of finite element analysis, the overall mechanical rigidity and stability are excellent, and can maintain long-term reliable precision, improve processing stability and tool life, stress relief treatment improves precision stability, High-strength hard rail structure, the transmission system adopts screw pre-tensioning design to improve the performance of reflecting rigidity.

Main features of this machine tool:

1. The spindle unit is an independent sleeve type. The spindle system has passed strict dynamic balance tests, with high precision, good precision retention, small thermal deformation, and good thermal stability. The maximum speed can reach 2500rpm, and the nose deflection accuracy is within 0.003MM. The front end of the shaft uses a large-diameter high-precision double-row roller bearing with a combined oblique contact ball bearing structure. The optimal span two-point balanced support design can withstand radial and axial loads, and can also be used for high-speed precision for users. Cutting can also be used for low-speed heavy cutting, especially suitable for mass production of products with complex shapes, high precision requirements, and high finish.

2. High rigidity servo power turret. It is helpful for the rapid and precise tool change performance of the servo turret, coupled with the power milling of the high-speed power shaft, to achieve the excellent processing capability of turning and milling. The tool holder is installed with a high-rigidity BMT installation interface. The power transmission shaft is driven by a servo spindle motor.

3. The machine tool is equipped with hard rail guide rails and ball screws, and the heat-treated and precision-ground ball screws can ensure the best

Excellent precision and durability, each axis adopts direct transfer axis structure and double anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy.

4. This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps and hydraulic valves and other components, which greatly reduces the failure rate. The design of the hydraulic and lubrication system is simple and reliable. The machine tool adopts centralized quantitative automatic lubrication.

5. The hydraulic tailstock has a high rigid structure integral tailstock, which can eliminate vibration and provide excellent stability. The expansion and contraction of the sleeve is realized by the hydraulic cylinder, which is convenient, fast and reliable.

6. The Taiwan rotary chuck oil cylinder is adopted, and the automatic chip removal device is selected at the same time, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. Special fixture.

Product Parameters

 

Name	Unit	SY3000MH/E
Max. swing diameter over bed	mm	Φ640
Max. processing diameter	mm	Φ460
Max. swing diameter over cross slide	mm	Ф350
Max. processing length	mm	3250
Spindle nose	/	A2-15
Chuck	"	15
Spindle bore diameter	mm	Ф132
Bar diameter	mm	Ф117
Max. spindle speed	rpm	1500
Spindle motor power	kw	26KW
Motor torque 248 pulley ratio; 1:2	Nm	496/706
X/Z travel	mm	280/3310
X/Z Specification of shaft guide		Box way
X/Z Shaft motor torque	Nm	18.6
X/Z motor power	KW	2.9/2.9
X/Z axis moving fast	m/min	18/18
Positioning accuracy	mm	±0.005
Repeatability	mm	±0.003
Power turret	/	BMT65-12T/ER32
Power turret motor	Kw	5.0/7.5
Max speed of power turret	Rpm	5000
The specification of outer diameter tool holder	mm	25x25
The specification of inner diameter tool holder	mm	Ф50
The adjacent tool change time	sec	0.2
Programmable hydraulic tail seat		Hydraulic
The biggest stroke of the tail	mm	3180
Morse Slideway	type	Mosh5#
Sleeve diameter	mm	Ф100
Sleeve travel	mm	80
Machine size	m	9700*2350*2200
Machine Weight	kg	12500
Cutting fluid tank volume	L	250
Cutting water pump	kw	0.75
Hydraulic unit box volume	L	40
Hydraulic oil pump motor power	kw	1.5
Lubricant tank volume	L	2
Automatic lubrication pump motor power	W	50
Cooling water pump power	W	750

 

Products Configurations

Company Profile

 

Quality Control

Our Advantages

FAQ

 

Q1: How can I choose the most suitable machines?
Please share your specifications with us, and we will recommend the best model for you. Alternatively, you can select the exact model you need, or send us your product drawings, and we will identify the most suitable machines for your requirements.

Q2: What are the main products of your company?
We specialize in a wide range of machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and Turning and Milling Composite Processing units.

Q3: Where are your factories located? How can I visit them?
Our factories are located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us at any of these locations.

Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA options.

Q5: What are the payment terms?
Our payment terms are T/T, with a 30% initial payment upon order and the remaining 70% balance due before shipment.

Q6: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is 1 set. However, certain low-cost machines may require a higher quantity.

We want to know:
1. For the most accurate evaluation, we strongly recommend providing the size and material of your workpiece. If possible, sending us the workpiece drawing will help us suggest the most suitable model for you.
2. If you need a CIF price, please kindly inform us of the port of destination.