| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability. It can maintain long-term reliable precision, processing stability, and tool life. Stress relief treatment improve accuracy and stability. The high-strength roller rail design and screw pre-tension drive system enhance response rigidity.
Both ends of the workpiece can be machined simultaneously in a single clamping, significantly simplifying manual operations, boosting output, and reducing processes. The second spindle, capable of full turning, handles workpieces during machining to reduce cycle times.
1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminates spindle vibration spindle, with nose end deflection accuracy within 0.002mm. This improves the surface finish of the workpiece.
The rear-mounted rotor ensures easy installation and maintenance.
The spindle motor features a cooling system that mitigates thermal displacement effects, maintaining consistent spindle working temperature. The spindle system undergoes rigorous dynamic balance testing, exhibiting excellent precision retention, high rigidity, and high efficiency. This enables the machine to perform both finishing and rough machining, as well as heavy cutting. Ideal for mass-producing complex, high-finish components.product.
2. High rigidity integral servo power turret: Known for rapid and precise tool changes. The tool holder features a high-rigidity BMT interface, driven by a servo spindle motor for power transmission.
3. Equipped with THK linear guide rails and ball screws, the heat-treated, precision-ground ball screws ensure optimal precision and durability. Each axis uses a direct transfer shaft structure with a double-anchor pre-relay method to minimize thermal displacement, significantly improving machining accuracy. High rigidity, large size, and heavy-duty linear slide rails maintain machine accuracy under impact, allow smooth displacement, and low noise, extending service life.
4. Standard configuration includes the FANUC system, with the feed drive utilizing a FANUC servo motor.
5. Perfect hydraulic and lubrication systems, incorporating high-quality hydraulic pumps, valves, and components, greatly reduce failure rates. The design is simple yet reliable.
6. Features a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, significantly reducing operator labor intensity while ensuring safe, efficient production. These components can be programmed for control. Special fixture.
| Name | Unit | SY200MS |
| The largest diameter rotating bed | mm | Ф600 |
| Max processing diameter | mm | Ф400 |
| Max.Swing Over Cross Slide | mm | Ф300 |
| Max processing length | mm | 290 |
| Bar diameter | mm | Ф45/45 |
| Spindle nose | / | A2-5 |
| Spindle hole diame | mm | Ф56 |
| Max speed of spindle | rpm | 5500 |
| Spindle motor power | kw | 11 |
| Spindle motor power | Nm | 61-125 |
| Hydraulic Cylinder/Chuck | / | 6" |
| Spindle nose | / | A2-5 |
| Spindle hole diame | mm | Ф56 |
| Max speed of spindle | rpm | 5500 |
| Spindle motor power | kw | 11 |
| Spindle motor power | Nm | 61-125 |
| Hydraulic Cylinder/Chuck | / | 6" |
| X/Z/S motor power | kw | 2.4/2.4/1.8 |
| X/Z/S travel | mm | 240/230/360 |
| X/Z/Y/S axis moving fast | mm/min | 20/20/20 |
| Slide rail type | mm | 35 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| The Tool tower type | mm/pcs | BMT55-12T |
| Power cutter tower motor | Kw | 5 |
| Max speed of spindle | rpm | 5000 |
| The tool biock specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф40 |
| The adjacent tool change time | sec | 0.15 |
| Machine size | mm | 2600*2100*1900 |
| Machine Weight | kg | 4500 |
| Cutting fluid tank volume | L | 150 |
| Volume of hydraulic unit box | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2L |
| Auto lube pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
){kind=link}