| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-strength HT300 one-piecestructurecastingironbed, 30-degree steptypeflat rail structure, utilizing finite element analysis for superb mechanical rigidity and stability. Ensures long-term accuracy, reliable processing stability, and extended tool life. Stress relief treatment enhances accuracy and stability. High-strength roller rail design and screw pre-tension drive system elevate response rigidity.improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed simultaneously in one clamping, simplifying manual operation, boosting output, and reducing processing steps. The second spindle is capable of full turning, allowing workpieces to be machined efficiently, thus reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ringtypeincremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminates spindle vibrationspindle, and the deflection accuracy of the nose end is within 0.002mm. Enhances the workpiece surface finish.
The rear-mounted rotor facilitates installation and maintenance.
The spindle motor, equipped with a cooling system, suppresses thermal displacement, ensuring a constant working temperature. The spindle system, tested for dynamic balance, retains superb precision, rigidity, and efficiency. This enables the machine to perform both fine finishing and rough heavy cutting, ideal for mass production of complex and high-finish products.product.
2. High rigidity integral servo power turret offers rapid and precise tool changes. The high-rigidity BMT interface ensures stable tool holder installation, and the power transmission shaft is driven by a servo spindle motor.
3. Equipped with THK linear guide rails and ball screw, the heat-treated and precision-ground ball screw guarantees optimal precision and durability. Each axis features a direct transfer shaft structure and a double-anchor pre-relay method to minimize thermal displacement, substantially enhancing machining accuracy. High rigidity, large size, and heavy-duty linear slide rails maintain machine accuracy under impact, ensuring smooth displacement and low noise for prolonged service life.
4. Standard configuration FANUC system, utilizing FANUC servo motors for feed drive.
5. A perfect hydraulic and lubrication system with high-quality hydraulic pumps and valves significantly reduces the failure rate. The system design is simple yet reliable.
6. Incorporates a Taiwan rotary chuck, oil cylinder, and automatic chip removal device to greatly reduce operator labor intensity and enable safe, efficient production. These functional components can be controlled via programming for maximum efficiency.
| Item | Unit | 150MS-II/E |
| Max. swing diameter over bed | mm | Ф380 |
| Max. processing diameter | mm | Ф100 |
| Max. processing diameter Over tool holder |
mm | Ф160 |
| Max. processing length | mm | 150 |
| Spindle nose | type | A2-5 |
| Max. speed of spindle | rpm | 5500 |
| Oil cylinder/Chuck | " | 6 |
| Spindle bore diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Direct drive spindle motor power | kw | 17.5 |
| Spindle torque | N.m | 62-125 |
| Sub spindle nose | type | A2-4 |
| Max. speed of Sub spindle | rpm | 6000 |
| Oil cylinder/collect | " | 5 |
| Sub spindle bore diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Direct drive sub spindle motor power | kw | 11 |
| Sub spindle torque | N.m | 27-66 |
| X1/Z1 motor power | kw | 1.8/1.2 |
| X2/Z2 motor power | kw | 1.2/1.2 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
| X1/Z1 slide rail type | / | Roller 35/35 |
| X2/Z2 slide rail type | / | Roller 30/30 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Upper power turret type | / | BMT45-12T |
| Upper power turret motor | Kw/N.m | 2.2/26 |
| Max. speed of upper power turret | rpm | 6000 ER20 |
| Specification of outer diameter tool holder | mm | 20x20 |
| Specification of inner diameter tool holder | mm | Ф32 |
| Adjacent tool change time | sec | 0.15 |
| Lower turret type | / | NC8T |
| Max. speed of lower power turret | mm | 25x25 |
| Specification of outer diameter tool holder | mm | Ф32 |
| Specification of inner diameter tool holder | sec | 0.15 |
| Machine dimension | m | 2.2x2.1x1.7 |
| Machine weight | kg | 3200 |
| Cutting fluid tank volume | L | 180 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricant oil tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
Simply share your specifications with us, and we will identify the best model tailored for your needs. You can also select an exact model, or send us your product drawings, and we'll ensure you get the most appropriate machine.
Q2: What are the main products of your company?
Our company specializes in a wide range of machines, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and Turning and Milling Composite Processing, among others.
Q3: Where is your factory located? How can I visit there?
We operate five factories situated in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly welcomed to visit any of our locations.
Q4: How do you transport the machines?
We provide comprehensive transportation solutions, including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
We accept T/T payments with a 30% initial payment at the time of order and a 70% balance payment before shipment.
Q6: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is 1 set. However, some lower-cost machines may require an order of more than 1 set.
We want to know:
1. We highly recommend providing the size and material of your workpiece for our evaluation. If possible, please send us the workpiece drawing, so we can recommend the most suitable model for you.
2. If you need a CIF price, please kindly inform us of the port of destination.
){kind=link}