![Oturncnc CV200 CE Approved High Precision CNC 5 Axis Vertical Machining Center 5-Axis Simultaneous Vmc with Fanuc/Siemens](//www.micstatic.com/athena/img/transparent.png)
Product Description
The five-axis vertical machining center CV200 has the characteristics of high rigidity, high precision and high efficiency machining. The column adopts a herringbone design with a large span, which can greatly enhance the bending and torsional strength of the column; the workbench adopts a reasonable slider span and is surface quenched, so that the force on the workbench is uniform and the hardness is improved; the bed adopts a trapezoidal cross-section, reducing The center of gravity improves the torsional strength; the whole machine adopts the best structural design to provide the best overall stability.
The three-axis high-speed displacement can reach 60m/min, the farthest tool change time is only 1.4S, and the maximum spindle acceleration and deceleration time is 2.5S (0-20000rmp). These indicators greatly shorten the non-processing time and improve the processing efficiency. It is very suitable for batch processing of parts in enterprise workshops, especially in the 3C industry, drilling and tapping processes such as aluminum substrates.
Adopt latest C80PLus system, 15-inch super large LCD display, tool trajectory dynamic graphic display, intelligent warning display, self-diagnosis and other functions make the use and maintenance of the machine tool more convenient and fast; the high-speed bus communication method greatly improves the CNC system. Data processing capability and control performance, the program storage capacity is increased to 4G, and the pre-reading capability is increased to 3000 lines/s, which facilitates the fast and efficient transmission and online processing of large-capacity programs.
The RTCP (Rotation Tool center Point) of the five-axis machining center is the tool tip point control function. After turning on the RTCP function, the controller will change from originally controlling the end face of the tool holder to controlling the tool tip point. The tool tip following can compensate for the linearity caused by the rotary axis. Error to prevent knife collision. As shown in the figure, at point A of the workpiece, the center line of the tool axis changes directly from the horizontal position to the vertical position. If the linear error is not corrected, the tool tip will deviate from point A or even penetrate the workpiece, causing a serious accident. Because the continuous movement of the swing axis and the rotary axis causes changes in the position of point A, the original tool tip position in the program must be corrected to ensure that the tool tip position coordinates are always unchanged relative to point A, as if the tool tip is moving with point A. , this is the tip of the knife following.
This function has 0 ~ 9 levels, the 9th level is the highest precision,while the 1st - 8th level compensates the servo backward error, and gives the processing path proper smoothness.
High-speed and high-precision three-dimensional processing:
The high-speed spindle, the 3D arc machining control can pre-read 2000blocks and smooth path correction for high-speed and high-precision machining.
High Precision Five Axis Simultaneous Machining
Highly rigid structure,efficient tool exchange,agile spindle acceleration and deceleration,high-speed rapid speed,effectively reduces processing time.
High Rigidity Structure:
Improve the form of structure and optimize the allocation to enhance the machine's rigidity. The shape of machine tool and column and the allocation optimization are the most suitable shape through CAE analysis. The various improved measures which are invisible outside are reflecting a stable cutting ability which the spindle speed cannot show.
Product Parameters
Item |
unit |
Specification |
Travel |
X/Y/Z axis travel |
mm |
500×400×330 |
|
Distance from spindle end face to worktable surface |
mm |
100-430 |
|
Distance from spindle center to column guide rail surface |
mm |
412 |
|
The maximum distance between the A-axis 90° spindle center and the C-axis disk surface |
mm |
235 |
3 axis feed |
X/Y/Z axis rapid displacement |
m/min |
60/60/60 |
|
Cutting feed rate |
mm/min |
50-30000 |
Spindle |
Spindle specifications (installation diameter/transmission mode) |
mm |
95/direct |
|
Spindle taper |
mm |
BT30 |
|
Spindle speed |
r/min |
24000 |
|
Spindle motor power (continuous/S3 60%) |
kW |
5.7/11 |
|
Spindle Motor Torque (Continuous/S3 60%) |
N.m |
11/22 |
Tool magazine |
Magazine capacity |
|
21T |
|
Tool change time (C-C) |
s |
1.2-1.4 |
|
tool diameter/length |
mm |
80/250 |
|
tool weight |
kg |
3 |
|
Total tool weight |
kg |
≤33 |
Guide |
X-axis guideway (size/number of sliders) |
mm |
30/2 |
|
Y-axis guideway (dimensions/quantity of sliders) |
|
30/2 |
|
Z-axis guideway (dimensions/quantity of sliders) |
|
30/2 |
screw |
X-axis screw |
|
Φ28×16 |
|
Y-axis lead screw |
|
Φ28×16 |
|
Z axis screw |
|
Φ32×16 |
Accuracy |
positioning accuracy |
mm |
±0.005/300 |
|
Repeatability |
mm |
±0.003 |
5 axis |
Turntable drive method |
|
Moter direct |
|
Turntable diameter |
mm |
200*150 |
|
C plate height |
mm |
297 |
|
A axis center height |
mm |
270 |
|
Maximum Machinable Workpiece Outer Diameter |
mm |
255 |
|
Allowable load weight of turntable (in horizontal/inclined) |
kg |
40/20 |
|
A-axis rated/maximum speed |
rpm |
50/100 |
|
C-axis rated/maximum speed |
rpm |
200/230 |
|
C-axis continuous/maximum cutting torque |
Nm |
27/127 |
|
A-axis positioning/repeatability |
arc-sec |
10/6 |
|
C-axis positioning/repeatability |
arc-sec |
8/4 |
Lubrication |
Lubrication unit capacity |
L |
2 |
|
Oil separator type |
|
volumetric |
Cutting fluid |
Tank capacity |
L |
140 |
|
Cutting pump parameters |
|
0.25Mpa×6L/min |
Others |
Air demand |
kg/c |
≥6 |
|
Air source flow |
mm3/min |
≥0.2 |
|
battery capacity |
KVA |
10 |
|
Machine Weight (Comprehensive) |
t |
2.9 |
|
Mechanical Dimensions (L×W×H) |
mm |
1589×2322×2504 |
Products Configurations
![Oturncnc CV200 CE Approved High Precision CNC 5 Axis Vertical Machining Center 5-Axis Simultaneous Vmc with Fanuc/Siemens](//www.micstatic.com/athena/img/transparent.png)
Company Profile
![Oturncnc CV200 CE Approved High Precision CNC 5 Axis Vertical Machining Center 5-Axis Simultaneous Vmc with Fanuc/Siemens](//www.micstatic.com/athena/img/transparent.png)
Quality Control
![Oturncnc CV200 CE Approved High Precision CNC 5 Axis Vertical Machining Center 5-Axis Simultaneous Vmc with Fanuc/Siemens](//www.micstatic.com/athena/img/transparent.png)
Our Advantages
![Oturncnc CV200 CE Approved High Precision CNC 5 Axis Vertical Machining Center 5-Axis Simultaneous Vmc with Fanuc/Siemens](//www.micstatic.com/athena/img/transparent.png)
FAQ
Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best model for you,or you can choose the exact model,you can also send us the products drawing,we will choose the most suitable machines for you .
Q2: What's your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe Machine ,CNC Milling Machine,CNC Turning Maching,Vertical Machining Center ,Horizontal Machining Center,Lathe Machines,Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong.You are warmly welcomed to visit us.
Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA
Q5: What's the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment before shipment .
06: What's the MoQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
We want to know:
1.We strongly suggest you to tell us size, material of your workpiece for our evaluation if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
2.lf need ClF Price, please kindly tell us the port of destination.