| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted with high-strength HT300 one-piece structural casting of iron, this robust bed features a 30-degree step type flat rail structure. Utilizing advanced finite element analysis, it boasts exceptional mechanical rigidity and stability, ensuring long-term precision, processing consistency, and tool longevity. The stress relief treatment significantly enhances accuracy and stability. The high-strength roller rail design, combined with a screw pre-tension drive system, boosts response rigidity.
This innovative machine can process both ends of the workpiece simultaneously in one clamping, greatly simplifying manual operations, increasing productivity, and streamlining processes. Equipped with a second spindle capable of full turning, it efficiently handles workpieces during machining, significantly reducing cycle times.
1.Direct drive synchronous electric spindle device: Utilizes a magnetic ring type incremental encoder (Sine and cosine) with positioning accuracy of 20 arc seconds and C-axis indexing accuracy of 40 arc seconds.
This system effectively eliminates spindle vibration, ensuring deflection accuracy within 0.002 mm, improving workpiece surface finish.
The rear-mounted rotor design facilitates easy installation and maintenance.
Equipped with a spindle motor cooling system, it suppresses thermal displacement effects, maintaining a constant spindle working temperature. The spindle system undergoes rigorous dynamic balance testing, ensuring precision retention, high rigidity, and efficiency, enabling the machine to handle both finishing and rough machining tasks, including heavy cutting. Ideal for mass production of complex shapes with high surface finish.products.
2. High rigidity integral servo power turret. Featuring rapid and precise tool change performance, this turret uses a high-rigidity BMT interface and is driven by a servo spindle motor for efficient power transmission.
3. The machine is outfitted with THK linear guide rails and ball screws. Heat-treated and precision-ground, these ball screws ensure optimal precision and durability. Each axis employs a direct transfer shaft structure and a double-anchor pre-relay method, minimizing thermal displacement and greatly enhancing machining accuracy. The high rigidity, large size, and heavy-duty linear slide rails preserve machine accuracy under impact, ensuring smooth displacement and low noise, extending machine life.
4. Comes standard with a FANUC system, and the feed drive is powered by a FANUC servo motor.
5. Featuring a superior hydraulic and lubrication system with high-quality hydraulic pumps, valves, and components, this design significantly reduces failure rates. The system is straightforward and reliable.
6. Incorporates a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, which significantly lessen operator labor intensity, ensuring safe and efficient production. These functional components are programmable for enhanced control. Special fixtures are available.
| Item | Unit | 1200MS/E |
| The largest diameter rotating bed | mm | Φ700 |
| Max. processing diameter | mm | Φ520 |
| Max.Swing Over Cross Slide | mm | Ф350 |
| Max. processing length | mm | 1020 |
| Spindle nose | / | A2-8 |
| Max. speed of spindle | rpm | 2200 |
| Hydraulic Cylinder/Chuck | / | 10" |
| Spindle hole diame | mm | Ф86 |
| Bar diameter | mm | Ф76 |
| Spindle motor power | Kw | 17/25 |
| Spindle motor power | Nm | 180-400 |
| Spindle nose | / | A2-6 |
| Max. speed of spindle | rpm | 4300 |
| Hydraulic Cylinder/Chuck | / | 8" |
| Spindle hole diameter | mm | Ф66 |
| Bar diameter | mm | Ф52 |
| Spindle motor power | Kw | 18/22 |
| Spindle motor power | Nm | 91-227 |
| X/Z/S motor power | kw | 3.0/3.0/3.0 |
| X/Z travel | mm | 310/1130 |
| S travel | mm | 870 |
| X/Z/S axis moving fast | m/min | 24/24/24 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| X/Z/S axis rail specification | spes | 45/45/35 roller |
| X/Z/S shaft wire specifications | mm | 4012 |
| Power knife tower type | pcs | BMT65-12T |
| Power cutter tower motor | Kw/Nm | 7.5/47.8 |
| Max. speed of | rpm | 6000 |
| The knife biock specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф50 |
| The adjacent tool change time | sec | 0.2 |
| positioning accuracy | / | ±2" |
| Repeat positioning accuracy | / | ±1" |
| Machine size | mm | 3900*2110*2100 |
| Machine Weight | kg | 7700 |
| Cutting fluid tank volume | L | 300 |
| Cooling water pump power | W | 750 |
| Volume of hydraulic unit box | L | 45 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
Q1:How can l choose the most suitable machines ?
Please tell me your specifications, and we will select the best model for you. Alternatively, you can choose the exact model yourself or send us the product's drawing. We will ensure you get the most suitable machine for your needs.
Q2: What's your main products of your company?
We specialize in a diverse range of high-quality machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and advanced turning and milling composite processing equipment.
Q3: Where is our factory located? How can l visit there?
Our factories are strategically located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us and experience our operations firsthand.
Q4. How do you transport it?
We provide comprehensive transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What's the Payment Terms ?
Our payment terms are T/T: 30% initial payment when placing the order and 70% balance payment before shipment.
06: What's the MoQ?
A: Our minimum order quantity is 1 set. However, for some lower-cost machines, the MoQ may be higher.
We want to know:
1. We strongly suggest you provide the size and material of your workpiece for our evaluation. If possible, send us the workpiece drawing so we can recommend the most suitable model for your requirements!
2. If you need a CIF price, please kindly inform us of the port of destination.
){kind=link}