Crafted with high-strength HT300 one-piecestructurecastingironbed, this 30-degree steptypeflat rail structure utilizes finite element analysis for exceptional mechanical rigidity and stability. It ensures long-term accuracy, processing stability, and tool longevity, thanks to stress relief treatment.improve accuracy and stability with a high-strength roller rail design. The drive system features a screw pre-tension design that enhances response rigidity.
Simultaneous processing at both ends of the workpiece in one clamping significantly simplifies manual operations, boosts output, and reduces processes. The second spindle is fully capable of turning and handling workpieces during machining, thereby reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ringtypeincremental encoder (Sine and cosine) achieves positioning accuracy of 20 arc seconds and C-axis indexing accuracy of 40 arc seconds.
Effectively eliminate spindlevibration, with nose end deflection accuracy within 0.002mm.Enhances surface finish of the workpiece.
The rear-mounted rotor facilitates easy installation and maintenance.
Equipped with a cooling system, the spindle motor maintains constant working temperature, suppressing thermal displacement. The spindle system, having passed strict dynamic balance tests, retains precision, high rigidity, and efficiency. It excels in both finishing and heavy-duty rough machining, ideal for mass production of complex shapes and high-finish products.product.
2. High rigidity integral servo power turret offers rapid and precise tool change performance. It features a high-rigidity BMT interface and power transmission driven by a servo spindle motor.
3. Equipped with THK linear guide rails and ball screws, heat-treated and precision-ground for superior precision and durability. Each axis employs a direct transfer shaft structure and double-anchor pre-relay method, minimizing thermal displacement and enhancing machining accuracy. It ensures smooth displacement, low noise, and extended service life even under impact, thanks to its high rigidity, large size, and heavy-duty linear slide rails.
4. Standard configuration with FANUC system. The feed drive features a FANUC servo motor.
5. A superior hydraulic and lubrication system incorporating high-quality hydraulic pumps, valves, and components, drastically reduces failure rates. The design is both simple and reliable.
6. Featuring a Taiwan rotary chuck, oil cylinder, and automatic chip removal device to greatly reduce operator labor intensity and ensure safe, efficient production. These components can be controlled via programming and include a special fixture.
| Item |
Unit |
150MS-III |
| Max. swing diameter over bed |
mm |
Ф380 |
| Max. processing diameter |
mm |
Ф100 |
Max. processing diameter
Over tool holder |
mm |
Ф160 |
| Max. processing length |
mm |
150 |
| Spindle nose |
type |
A2-5 |
| Max. speed of spindle |
rpm |
5500 |
| Oil cylinder/Chuck |
" |
6 |
| Spindle bore diameter |
mm |
Ф56 |
| Bar diameter |
mm |
Ф45 |
| Direct drive spindle motor power |
kw |
17.5 |
| Spindle torque |
N.m |
62-125 |
| Sub spindle nose |
type |
A2-4 |
| Max. speed of Sub spindle |
rpm |
6000 |
| Oil cylinder/collect |
" |
5 |
| Sub spindle bore diameter |
mm |
Ф46 |
| Bar diameter |
mm |
Ф32 |
| Direct drive sub spindle motor power |
kw |
11 |
| Sub spindle torque |
N.m |
27-66 |
| X1/Z1 motor power |
kw |
1.8/1.2 |
| X2/Z2 motor power |
kw |
1.2/1.2 |
| X1/Z1 travel |
mm |
135/370 |
| X2/Z2 travel |
mm |
215/400 |
| X1/Z1/X2/Z2 fast moving |
m/min |
30/30/30 |
| Positioning accuracy |
mm |
±0.005 |
| Repeat positioning accuracy |
mm |
±0.003 |
| X1/Z1 slide rail type |
/ |
Roller 35/35 |
| X2/Z2 slide rail type |
/ |
Roller 30/30 |
| Upper power turret type |
/ |
BMT45-12T |
| Upper power turret motor |
Kw/N.m |
2.2/26 |
| Max. speed of upper power turret |
rpm |
6000 ER20 |
| Specification of outer diameter tool holder |
mm |
20x20 |
| Specification of inner diameter tool holder |
mm |
Ф32 |
| Adjacent tool change time |
sec |
0.15 |
| Lower power turret type |
/ |
BMT40-8T |
| Lower power turret motor |
Kw/N.m |
2.2/26 |
| Max. speed of lower power turret |
rpm |
6000 ER20 |
| Max. speed of lower power turret |
mm |
20x20 |
| Specification of outer diameter tool holder |
mm |
Ф25 |
| Specification of inner diameter tool holder |
sec |
0.15 |
| Machine dimension |
m |
2.2x2.1x1.7 |
| Machine weight |
kg |
3500 |
| Cutting fluid tank volume |
L |
180 |
| Hydraulic unit box volume |
L |
40 |
| Hydraulic pump motor power |
kw |
1.5 |
| Lubricant oil tank volume |
L |
2 |
| Automatic lubrication pump motor power |
W |
50 |
| Cooling water pump power |
W |
750 |
){kind=link}