| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted with high-strength HT300 one-piecebody structure,casting iron bed, this lathe features a 30-degree step typeflat rail structure. Utilizing advanced finite element analysis, this design boasts excellent overall mechanical rigidity and stability, ensuring long-term reliable accuracy, processing stability, and tool life. An effective stress relief treatmentenhancesaccuracy and stability. The high-strength roller rail design and screw pre-tension drive system significantly improve response rigidity.
The machine's innovative design allows both ends of the workpiece to be processed simultaneously in one clamping, simplifying manual operations, boosting output, and reducing process steps. The second spindle supports full turning and can handle workpieces during machining, substantially reducing cycle times.
1.Direct drive synchronous electric spindle device: features a magnetic ringtypeincremental encoder (Sine and cosine), providing positioning accuracy of 20 arc seconds and C-axis indexing accuracy of 40 arc seconds.
This setup effectively eliminates spindlevibration,with the nose-end deflection accuracy maintained within 0.002mm,improving workpiece surface finish.
The rear-mounted rotor design facilitates easy installation and maintenance.
Equipped with a cooling system, the spindle motor suppresses thermal displacement effects, ensuring a constant working temperature. The spindle system undergoes rigorous dynamic balance tests, maintaining high precision, rigidity, and efficiency. This allows the machine to excel in both finishing and rough machining, making it ideal for mass production of complex shapes requiring high finishandquality.
2. Integrated high-rigidity servo power turret: Features rapid and precise tool change performance. The tool holder installation utilizes a high-rigidity BMT interface, with the power transmission shaft driven by a servo spindle motor.
3. Equipped with THK linear guide rails and precision-ground ball screws, this machine ensures optimal precision and durability. Each axis employs a direct transfer shaft structure and a double-anchor pre-relay method, minimizing thermal displacement and significantly improving machining accuracy. The high-rigidity, large size, and heavy-duty linear slide rails maintain machine accuracy under impact, ensuring smooth displacement and low noise, which extends the machine's service life.
4. Standard configuration includes a FANUC system, with the feed drive powered by a FANUC servo motor.
5. The hydraulic and lubrication systems are optimized with high-quality hydraulic pumps, valves, and components, drastically reducing failure rates. Designed with simplicity and reliability in mind, these systems ensure consistent performance.
6. Featuring a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, this machine significantly reduces operator labor intensity, enabling safe and efficient production. These functional components can be controlled via programming, and special fixtures are available.
| Item | Unit | 1200MS/E |
| The largest diameter rotating bed | mm | Φ700 |
| Max. processing diameter | mm | Φ520 |
| Max.Swing Over Cross Slide | mm | Ф350 |
| Max. processing length | mm | 1020 |
| Spindle nose | / | A2-8 |
| Max. speed of spindle | rpm | 2200 |
| Hydraulic Cylinder/Chuck | / | 10" |
| Spindle hole diame | mm | Ф86 |
| Bar diameter | mm | Ф76 |
| Spindle motor power | Kw | 17/25 |
| Spindle motor power | Nm | 180-400 |
| Spindle nose | / | A2-6 |
| Max. speed of spindle | rpm | 4300 |
| Hydraulic Cylinder/Chuck | / | 8" |
| Spindle hole diameter | mm | Ф66 |
| Bar diameter | mm | Ф52 |
| Spindle motor power | Kw | 18/22 |
| Spindle motor power | Nm | 91-227 |
| X/Z/S motor power | kw | 3.0/3.0/3.0 |
| X/Z travel | mm | 310/1130 |
| S travel | mm | 870 |
| X/Z/S axis moving fast | m/min | 24/24/24 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| X/Z/S axis rail specification | spes | 45/45/35 roller |
| X/Z/S shaft wire specifications | mm | 4012 |
| Power knife tower type | pcs | BMT65-12T |
| Power cutter tower motor | Kw/Nm | 7.5/47.8 |
| Max. speed of | rpm | 6000 |
| The knife biock specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф50 |
| The adjacent tool change time | sec | 0.2 |
| positioning accuracy | / | ±2" |
| Repeat positioning accuracy | / | ±1" |
| Machine size | mm | 3900*2110*2100 |
| Machine Weight | kg | 7700 |
| Cutting fluid tank volume | L | 300 |
| Cooling water pump power | W | 750 |
| Volume of hydraulic unit box | L | 45 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
Q1: How can I choose the most suitable machines?
Please share your specifications with us, and we will select the best model tailored to your needs. Alternatively, you can directly choose a model, or send us the product drawings, and we will recommend the most suitable machines for you.
Q2: What are the main products of your company?
Our expertise spans a wide range of machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and integrated turning and milling composite processing equipment.
Q3: Where is your factory located, and how can I visit?
We proudly operate five factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit any of our facilities.
Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
Payment Terms: T/T, with a 30% initial payment upon order and the remaining 70% balance before shipment.
Q6: What is the minimum order quantity (MoQ)?
A: 1 set. (Note: Only certain low-cost machines may require a higher minimum order quantity.)
We want to know:
1. We strongly recommend providing the size and material details of your workpiece for our evaluation. Sending us a workpiece drawing will enable us to recommend the most suitable model.
2. If you need a CIF price, please kindly inform us of the port of destination.
){kind=link}