Oturncnc Tool Travelling Double Spindle CNC Lathe Sy150msy-III with Wholesale Price

• Customization: Available
• After-sales Service: Support
• Warranty: One Year
• Model NO.: SY150MSY-III
• Type: Turret Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Inclined Guide Rail
• Tool Holder: Double-tool Holder CNC Lathe
• Power Source: Electric
• Controlling Mode: CNC
• Automatic Grade: Automatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: GS, CE, ISO 9001
• Condition: New
• Control System: Fanuc, Siemens, Mitsubishi
• Spindle: A2-6,A2-8,A2-11
• Chuck: 6,8,10,12inch
• Tool Turret: Vdi or Bmt
• Motor Power: 11,15,18.5,22kw
• Transport Package: Plywood Case
• Specification: 2200*2100*1700
• Trademark: Oturn
• Origin: China
• HS Code: 8458110090
• Production Capacity: 1000/Year

Product Description

Product Description

High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed at the same time in one clamping, which greatly simplifies the manual operation, increases the output and reduces the process. The second spindle is capable of full turning and can express workpieces during machining, reducing cycle time.

1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.

Effectively eliminate the vibration of spindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.

The rear-mounted rotor is used to facilitate installation and maintenance.

The spindle motor is equipped with cooling system to suppress the influence of thermal displacement and ensure a constant working temperature of the spindle. The spindle system has passed the strict dynamic balance test. It has good precision retention, high rigidity and high efficiency, so that the machine can not only complete finishing machining, but also rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high finish product.

2.High rigidity integral servo power turret. With rapid and precise tool change performance. The tool holder installation used high-rigidity BMT interface, and the power transmission shaft is driven by servo spindle motor.
3.Y-axis adopts 100MM stroke (±50 from the center line), capable of eccentric milling, drilling and tapping, equipped with a high-torque power turret and a servo-driven C-axis, capable of processing complex parts.

4.The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw can ensure the best precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy. High rigidity, large size, and heavy-duty linear slide rails can keep the accuracy of the machine unaffected when it is impacted, the displacement is smooth and the noise is low, which can prolong the service life.

5.Standard configuration FANUC system, and the feed drive adopts FANUC servo motor.

6.Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.

7.Using Taiwan rotary chuck, oil cylinder and automatic chip removal device, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. At the same time, various special fixtures can be designed and installed according to the special requirements of users.

Product Parameters

 

 

Model	Name	Unit	SY150MSY-III
Travel	The largest diameter rotating bed	mm	Ф380
	Maximum processing diameter	mm	Ф100
	Max.Swing Over Cross Slide	mm	Ф160
	Maximum processing length	mm	150
Spindle motor Hydro cylinder Chuck	Spindle nose	/	A2-5
	Maximum speed of spindle	rpm	6000
	Hydraulic Cylinder/Chuck	/	6"
	Spindle hole diameter	mm	Ф56
	Bar diameter	mm	Ф45
	Spindle motor power	kw	11
	Spindle motor torque	Nm	61-125
Sub-spindle motor Hydro cylinder Chuck	Spindle nose	/	A2-4
	Maximum speed of spindle	rpm	6000
	Hydraulic Cylinder/Chuck	/	5"
	Spindle hole diameter	mm	Ф46
	Bar diameter	mm	Ф32
	Spindle motor power	kw	11
	Spindle motor power	Nm	34-67
X1/Z1/Y/X2/Z2 axis feed parameter	X1/Z1/Y motor power	kw	1.8/1.8/1.8
	X2/Z2 motor power	kw	1.3/1.3
	X1/Z1 travel	mm	135/370
	X2/Z2 travel	mm	215/400
	X/Z/Y/S axis moving fast	mm/min	30/30/10/30
	positioning accuracy	mm	±0.005
	repeat positioning accuracy	mm	±0.003
	Slide rail type	mm	Roller 35/35
	Slide rail type	mm	Roller 30/30
Power Turret parameters	Turret type	pcs	BMT45-12T
	Power motor	Kw	4.0kw
	Y travel	mm	80(±40)
	Maximum speed of	rpm	5000 ER20
	The tool block specifications	mm	20x20
	Circular cutter holder specification	mm	Ф32
	The adjacent tool change time	sec	0.15
Power Turret parameters	Turret type	pcs	BMT40-8T
	Power motor	Kw	3.0kw
	Maximum speed of	rpm	5000 ER20
	Tool block specifications	mm	20X20
	Circular cutter holder specification	mm	Ф25
	The adjacent tool change time	sec	0.15
Outline dimensions	Machine size	m	2.2x2.1x1.7
	Machine Weight	kg	3500
Other	Cutting fluid tank volume	L	150
	Volume of hydraulic unit box	L	40
	Hydraulic oil pump motor power	kw	1.5
	Volume of lubricating oil tank	L	2
	Auto lube pump motor power	W	50
	Cooling water pump power	W	750

 

Products Configurations

 

Company Profile

 

Quality Control

Our Advantages

FAQ

Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best model for you,or you can choose the exact model,you can also send us the products drawing,we will choose the most suitable machines for you .

Q2: What's your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe Machine ,CNC Milling Machine,CNC Turning Maching,Vertical Machining Center ,Horizontal Machining Center,Lathe Machines,Turning and milling composite processing so on.

Q3: Where is our factory located? How can l visit there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong.You are warmly welcomed to visit us.

Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA

Q5: What's the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment before shipment .

06: What's the MoQ?
A: 1 set .(Only some low cost machines will be more than 1 set )

We want to know:
1.We strongly suggest you to tell us size, material of your workpiece for our evaluation if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
2.lf need ClF Price, please kindly tell us the port of destination.