| After-sales Service: | Support |
|---|---|
| Warranty: | One Year |
| Type: | Turret Lathe |
| Processing Accessory: | Chuck CNC Lathe |
| Guide Rail: | Inclined Guide Rail |
| Tool Holder: | Double-tool Holder CNC Lathe |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed at the same time in one clamping, which greatly simplifies the manual operation, increases the output and reduces the process. The second spindle is capable of full turning and can express workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminate the vibration of spindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.
The rear-mounted rotor is used to facilitate installation and maintenance.
The spindle motor is equipped with cooling system to suppress the influence of thermal displacement and ensure a constant working temperature of the spindle. The spindle system has passed the strict dynamic balance test. It has good precision retention, high rigidity and high efficiency, so that the machine can not only complete finishing machining, but also rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high finishproduct.
2.High rigidity integral servo power turret. With rapid and precise tool change performance. The tool holder installation used high-rigidity BMT interface, and the power transmission shaft is driven by servo spindle motor.
3.The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw can ensure the best precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy. High rigidity, large size, and heavy-duty linear slide rails can keep the accuracy of the machine unaffected when it is impacted, the displacement is smooth and the noise is low, which can prolong the service life.
4.Standard configuration FANUC system, and the feed drive adopts FANUC servo motor.
5.Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.
6.Using Taiwan rotary chuck, oil cylinder and automatic chip removal device, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. Special fixture.
| Name | Unit | 208MS/E |
| Max. swing diameter over bed | mm | Φ680 |
| Max. processing diameter | mm | Φ400 |
| Max. swing diameter over cross slide | mm | Ф300 |
| Max. processing length | mm | 400 |
| Bar diameter of spindle/sub spindle | mm | Ф52/45 |
| Spindle nose | / | A2-6 |
| Spindle hole diameter | mm | Ф65 |
| Max. speed of spindle | rpm | 4300 |
| Spindle motor power | kw | 18/22KW |
| Spindle torque | Nm | 105/227 |
| Hydraulic cylinder/Chuck | / | 8" |
| Sub spindle nose | / | A2-5 |
| Sub spindle hole diameter | mm | Ф56 |
| Max. speed of sub spindle | rpm | 5500 |
| Sub spindle motor power | kw | 11 |
| Sub spindle torque | Nm | 61-125 |
| Hydraulic Cylinder/Chuck | / | 6" |
| X/Z/S motor power | kw | 2.9/2.9/1.8 |
| X/Z/S travel | mm | 220/500/600 |
| X/Z/S axis moving fast | mm/min | 20/20/20 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Slide rail type | / | Roller 35mm |
| Power turret | / | BMT55-12T |
| Power turret motor | Kw | 5.0 |
| Max. speed of power tool holder | rpm | 5000 |
| The specification of outer diameter tool holder | mm | 25x25 |
| The specification of inner diameter tool holder | mm | Ф40 |
| The adjacent tool change time | sec | 0.2 |
| Machine size | m | 2600x1700x2100 |
| Machine Weight | kg | 5200 |
| Cutting fluid tank volume | L | 150 |
| Cutting water pump | kw | 0.75 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Lubricant tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
Please provide your specifications so we can select the best model for you. Alternatively, you can choose the exact model yourself. If you send us the product drawings, we will ensure to recommend the most suitable machine for your needs.
Q2: What are the main products of your company?
We specialize in a diverse range of machines, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and composite processing equipment for turning and milling.
Q3: Where is your factory located? How can I visit?
We have five factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us.
Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
Our payment terms are T/T, with a 30% initial payment when placing the order and the remaining 70% balance before shipment.
Q6: What is the MoQ (Minimum Order Quantity)?
A: Our MoQ is 1 set, although some low-cost machines may require an order of more than 1 set.
We want to know:
1. We strongly suggest you provide the size and material of your workpiece for our evaluation. If possible, please send us the workpiece drawings so we can recommend the most suitable model.
2. If you need a CIF price, please kindly inform us of the port of destination.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}