| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Constructed with a high-strength HT300 one-pieceintegral structurecastingironbed, featuring a 30-degree steptypeflat rail design, this machine employs finite element analysis for superior overall mechanical rigidity and stability. It ensures long-term reliable accuracy, consistent processing stability, and extended tool life. The bed undergoes stress relief treatment toimprove both accuracy and stability. The high-strength roller rail design and screw pre-tension drive system enhance response rigidity.
Achieve simultaneous processing on both ends of the workpiece in a single clamping, greatly simplifying manual operations, boosting output, and reducing procedural complexities. The second spindle is fully capable of turning and expressing workpieces during machining, significantly reducing cycle times.
1.Direct drive synchronous electric spindle device features a magnetic ringtypeincremental encoder (Sine and cosine) with positioning accuracy of 20 arc seconds and C-axis indexing accuracy of 40 arc seconds.
Effectively eliminates spindlevibration, maintaining nose end deflection accuracy within 0.002mm. This improves the surface finish of the workpiece.
Rear-mounted rotor design facilitates easy installation and maintenance.
The spindle motor, equipped with a cooling system, suppresses thermal displacement effects, ensuring a constant working temperature. The spindle system has undergone a stringent dynamic balance test, boasting excellent precision retention, high rigidity, and efficiency. This allows the machine to perform not only fine finishing but also rough machining and heavy cutting. It is particularly ideal for mass production of complex shapes and high-finishproducts.
2. High-rigidity integral servo power turret offers rapid and precise tool change performance. The tool holder employs a high-rigidity BMT interface, driven by a servo spindle motor for power transmission.
3. This machine is equipped with THK linear guide rails and precision-ground ball screws, ensuring optimal precision and durability. Each axis features a direct transfer shaft structure and a double-anchor pre-relay method to minimize thermal displacement, greatly enhancing machining accuracy. The robust, large-size, heavy-duty linear slide rails maintain machine accuracy under impact, offer smooth displacement, and reduce noise, thereby prolonging the machine's service life.
4. Equipped with standard FANUC system, the feed drive utilizes a FANUC servo motor.
5. The machine boasts a perfect hydraulic and lubrication system, using high-quality hydraulic pumps, valves, and other components, which significantly reduce the failure rate. The design of the hydraulic and lubrication system is straightforward and reliable.
6. Features a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, which substantially reduces operator labor intensity and promotes safe and efficient production. These functional components can be controlled via programming. Special fixtures available.
| Item | Unit | 150MS-II/E |
| Max. swing diameter over bed | mm | Ф380 |
| Max. processing diameter | mm | Ф100 |
| Max. processing diameter Over tool holder |
mm | Ф160 |
| Max. processing length | mm | 150 |
| Spindle nose | type | A2-5 |
| Max. speed of spindle | rpm | 5500 |
| Oil cylinder/Chuck | " | 6 |
| Spindle bore diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Direct drive spindle motor power | kw | 17.5 |
| Spindle torque | N.m | 62-125 |
| Sub spindle nose | type | A2-4 |
| Max. speed of Sub spindle | rpm | 6000 |
| Oil cylinder/collect | " | 5 |
| Sub spindle bore diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Direct drive sub spindle motor power | kw | 11 |
| Sub spindle torque | N.m | 27-66 |
| X1/Z1 motor power | kw | 1.8/1.2 |
| X2/Z2 motor power | kw | 1.2/1.2 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
| X1/Z1 slide rail type | / | Roller 35/35 |
| X2/Z2 slide rail type | / | Roller 30/30 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Upper power turret type | / | BMT45-12T |
| Upper power turret motor | Kw/N.m | 2.2/26 |
| Max. speed of upper power turret | rpm | 6000 ER20 |
| Specification of outer diameter tool holder | mm | 20x20 |
| Specification of inner diameter tool holder | mm | Ф32 |
| Adjacent tool change time | sec | 0.15 |
| Lower turret type | / | NC8T |
| Max. speed of lower power turret | mm | 25x25 |
| Specification of outer diameter tool holder | mm | Ф32 |
| Specification of inner diameter tool holder | sec | 0.15 |
| Machine dimension | m | 2.2x2.1x1.7 |
| Machine weight | kg | 3200 |
| Cutting fluid tank volume | L | 180 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricant oil tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can l choose the most suitable machines?
Please provide us with your specifications, and we will help you select the best model. Alternatively, you can choose a specific model yourself or send us your product drawings, and we will find the most suitable machine for you.
Q2: What are the main products of your company?
We specialize in a diverse range of machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and advanced Turning and Milling Composite Processing equipment.
Q3: Where is your factory located? How can I visit there?
Our factories are strategically located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us at any of these locations.
Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are your Payment Terms?
Our payment terms are T/T, with a 30% initial payment required when placing the order and a 70% balance payment due before shipment.
Q6: What is the Minimum Order Quantity (MOQ)?
A: Our MOQ is 1 set. However, for some low-cost machines, the MOQ may be more than 1 set.
We want to know:
1. We strongly recommend that you provide the size and material of your workpiece for our evaluation. Ideally, send us a workpiece drawing so we can recommend the most suitable model for you.
2. If you need a CIF price, please kindly specify the port of destination.
){kind=link}