| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The horizontal machining center CW500e has the characteristics of high rigidity, high precision and high efficiency machining. The column adopts a herringbone design with a large span, which can greatly enhance the bending and torsional strength of the column; the workbench adopts a reasonable slider span and is surface quenched, so that the force on the workbench is even and the hardness is improved; the bed adopts a trapezoidal cross-section, reducing The center of gravity improves the torsional strength; the whole machine uses finite element analysis to design each component to provide the best overall stability.
The three-axis rapid displacement is 48 M/min, the T-T tool change time is only 6S, the tool magazine is fully loaded for 24 hours, and there is no alarm for tool change . It is suitable for milling, drilling, expanding, boring, tapping and other processing procedures of various cavity parts. It is more suitable for small and medium-sized batches of multi-variety processing and production, and can also enter automatic lines for mass production.
Adopt the latest C80 PLus system, 15-inch super large LCD display, dynamic graphic display of tool trajectory, intelligent warning display, self-diagnosis and other functions to make the use and maintenance of the machine tool more convenient and fast; the high-speed bus communication method greatly improves the CNC system. With advanced data processing capability and control performance, the program storage capacity is increased to 4G, and the pre-reading capability is increased to 3000 lines/s, which facilitates the fast and efficient transmission and online processing of large-capacity programs.
| Item | Unit | CW500e | |
| Travel | Travel of X/Y/Z axis | mm | 1000×660×570 |
| Distance from spindle center to worktable |
mm | -5-655 | |
| Distance between the spindle end and worktable center | mm | 130-700 | |
| Worktable | Worktable diameter | mm | 500×500 |
| Worktable number | mm | 1 | |
| Max. load | kg | 400 | |
| Max workpiece size | mm | φ1000*600 | |
| Distance from worktable to ground | mm | 1130 | |
| Minimum division | Degree | 0.001 | |
| Feed of 3 axis | X/Y/Z axis fast move | m/min | 48/48/48 |
| Cutting feed rate | mm/min | 0-10000 | |
| Spindle | Spindle specification (installation diameter/transmission method) |
mm | 170 / Built-in |
| Spindle taper | m/min | BT40 | |
| Max. Spindle speed | mm | 15000 | |
| Spindle Motor Power (Continuous/S3 60%) |
Kw | 18.5/26 | |
| Spindle Motor Torque (Continuous/S3 60%) |
N.m | 29.2/53.5 | |
| Tool magazine |
Tool magazine capacity | / | 24T |
| Tools change time(T-T) | s | 6 | |
| Max. Tool diameter (full tool / adjacent tool) | mm | 80/150 | |
| Max. Tool length | mm | 350 | |
| Max. Tool weight | Kg | 8 | |
| Guide | X-axis guide (size/number of slides) | / | 35/2(roller) |
| Y-axis guide (size/number of slides) | / | 35/2(roller) | |
| Z-axis guide (size/number of slides) | / | 35/2(roller) | |
| Ball screw | X-axis screw | N | Φ40×16 |
| Y-axis screw | N | Φ40×16 | |
| Z-axis screw | N | Φ40×16 | |
| Accuracy | Positioning accuracy | mm | ±0.005/300 |
| Repeat positioning accuracy | mm | ±0.003/300 | |
| Lubrication system | Lubrication unit capacity | L | 2 |
| Oil separator type | / | Volumetric | |
| Cutting fluid | Water tank capacity | L | 240 |
| Cutting pump parameter | / | 0.32Mpa×16L/min | |
| Others | Air demand | Kg/cm2 | ≥6 |
| Air source flow | mm3/min | ≥0.4 | |
| Battery capacity | KVA | 22.5 | |
| Weight | T | 6.5 | |
| Machine size (Length x Width x Height) |
mm | 2653*2850*2972 | |
Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best model for you,or you can choose the exact model,you can also send us the products drawing,we will choose the most suitable machines for you .
Q2: What's your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe Machine ,CNC Milling Machine,CNC Turning Maching,Vertical Machining Center ,Horizontal Machining Center,Lathe Machines,Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong.You are warmly welcomed to visit us.
Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA
Q5: What's the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment before shipment .
06: What's the MoQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
We want to know:
1.We strongly suggest you to tell us size, material of your workpiece for our evaluation if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
2.lf need ClF Price, please kindly tell us the port of destination.
){kind=link}