| After-sales Service: | Support |
|---|---|
| Warranty: | One Year |
| Type: | Turret Lathe |
| Processing Accessory: | Chuck CNC Lathe |
| Guide Rail: | Inclined Guide Rail |
| Tool Holder: | Double-tool Holder CNC Lathe |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Crafted with a high-strength HT300 one-piecestructure,thiscastironbedfeatures a 30-degree steptypeflat rail design. Through rigorous finite element analysis, it offers exceptional mechanical rigidity and stability, ensuring long-term reliable accuracy, processing stability, and tool life. Stress relief treatment is applied toimproveaccuracy and stability. The high-strength roller rail design, combined with a drive system that adopts a screw pre-tension design, enhances response rigidity.
Both ends of the workpiece can be machined simultaneously in a single clamping, greatly simplifying manual operations, increasing output, and reducing processing steps. The second spindle allows for full turning capabilities during machining, thus minimizing cycle times.
1.Direct drive synchronous electric spindle device: The magnetic ringtypeincremental encoder (sine and cosine) boasts positioning accuracy of 20 arc seconds, with C-axis indexing accuracy at 40 arc seconds.
This design effectively eliminates spindlevibrationand maintains the nose end deflection accuracy within 0.002mm,improving the surface finish of workpieces.
The rear-mounted rotor design facilitates easy installation and maintenance.
Equipped with a cooling system, the spindle motor minimizes the impact of thermal displacement, ensuring a constant working temperature. The spindle system undergoes strict dynamic balance tests, providing excellent precision retention, high rigidity, and efficiency. This enables the machine to perform both finishing and heavy-duty cutting operations, especially suited for the mass production of complex shapes requiring high finishand precision.
2. High-rigidity integral servo power turret for rapid and precise tool changes. The turret uses a high-rigidity BMT interface, with power transmission driven by a servo spindle motor.
3. The machine includes THK linear guide rails and ball screws. The heat-treated, precision-ground ball screws ensure optimal precision and durability. Each axis uses a direct transfer shaft structure and a double-anchor pre-relay method to minimize thermal displacement and significantly improve machining accuracy. The high-rigidity, large-size, and heavy-duty linear slide rails maintain machine accuracy even under impact, ensuring smooth displacement and minimal noise, prolonging service life.
4. Standard configuration includes a FANUC system, with the feed drive powered by a FANUC servo motor.
5. The hydraulic and lubrication systems are designed to be perfect, featuring high-quality hydraulic pumps, valves, and components that significantly reduce failure rates. The system design is both simple and reliable.
6. Equipped with a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, these features substantially reduce operator labor intensity, ensuring safe and efficient production. All functional components are controllable via programming. Special fixtures are available.
| Name | Unit | 208MS/E |
| Max. swing diameter over bed | mm | Φ680 |
| Max. processing diameter | mm | Φ400 |
| Max. swing diameter over cross slide | mm | Ф300 |
| Max. processing length | mm | 400 |
| Bar diameter of spindle/sub spindle | mm | Ф52/45 |
| Spindle nose | / | A2-6 |
| Spindle hole diameter | mm | Ф65 |
| Max. speed of spindle | rpm | 4300 |
| Spindle motor power | kw | 18/22KW |
| Spindle torque | Nm | 105/227 |
| Hydraulic cylinder/Chuck | / | 8" |
| Sub spindle nose | / | A2-5 |
| Sub spindle hole diameter | mm | Ф56 |
| Max. speed of sub spindle | rpm | 5500 |
| Sub spindle motor power | kw | 11 |
| Sub spindle torque | Nm | 61-125 |
| Hydraulic Cylinder/Chuck | / | 6" |
| X/Z/S motor power | kw | 2.9/2.9/1.8 |
| X/Z/S travel | mm | 220/500/600 |
| X/Z/S axis moving fast | mm/min | 20/20/20 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Slide rail type | / | Roller 35mm |
| Power turret | / | BMT55-12T |
| Power turret motor | Kw | 5.0 |
| Max. speed of power tool holder | rpm | 5000 |
| The specification of outer diameter tool holder | mm | 25x25 |
| The specification of inner diameter tool holder | mm | Ф40 |
| The adjacent tool change time | sec | 0.2 |
| Machine size | m | 2600x1700x2100 |
| Machine Weight | kg | 5200 |
| Cutting fluid tank volume | L | 150 |
| Cutting water pump | kw | 0.75 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Lubricant tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
To help you select the most appropriate model, kindly provide us with your specifications. Alternatively, you can directly choose a model from our range or send us your product drawings, and we will recommend the best machine for you.
Q2: What are the main products of your company?
Our expertise lies in a variety of high-precision machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, and Turning and Milling Composite Processing Machines.
Q3: Where is your factory located? How can I visit?
We operate five factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly invite you to visit us.
Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA terms.
Q5: What are the payment terms?
We require a T/T payment: 30% initial payment when placing the order, and the remaining 70% before shipment.
Q6: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is 1 set, although for some low-cost machines, the minimum might be higher.
To better assist you, we need to know:
1. We highly recommend you provide the size and material of your workpiece for evaluation. If possible, please send us the workpiece drawing so that we can suggest the most suitable model for you.
2. If you require a CIF price, kindly inform us of the port of destination.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}