| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-strength HT300 one-piece structure casting iron bed, 30-degree steptype flat rail structure, enhanced with finite element analysis, boasting exceptional overall mechanical rigidity and stability. This ensures long-term reliable accuracy, stable processing, and extended tool life due to stress relief treatment toimprove accuracy and stability. The high-strength roller rail design, coupled with a screw pre-tension drive system, enhances response rigidity for superior performance.
With the innovative dual-spindle design, both ends of the workpiece can be processed simultaneously in one clamping operation, significantly simplifying manual intervention, boosting output, and reducing processing steps. The secondary spindle offers full turning capabilities, which expedites workpiece handling during machining, cutting down cycle times.
1.Direct drive synchronous electric spindle device: Featuring a magnetic ring typeincremental encoder (Sine and cosine) with positioning accuracy of 20 arc seconds and C-axis indexing accuracy of 40 arc seconds.
Effectively mitigates spindle vibration, ensuring the deflection accuracy at the nose end is within 0.002mm. This greatly enhances the surface finish of the workpiece.
The rear-mounted rotor design simplifies installation and maintenance.
The spindle motor is equipped with an advanced cooling system to control thermal displacement, ensuring a consistent working temperature for the spindle. This spindle system has undergone rigorous dynamic balance testing, guaranteeing precision retention, high rigidity, and superior efficiency. This enables the machine to perform both finishing and heavy-duty rough machining, making it ideal for mass production of complex, high-finish products.products.
2.High rigidity integral servo power turret. This turret features rapid and precise tool change capabilities. It utilizes a high-rigidity BMT interface for tool holder installation, with power transmission driven by a servo spindle motor.
3.Equipped with THK linear guide rails and ball screws, the heat-treated and precision-ground ball screws ensure optimal precision and durability. Each axis employs a direct transfer shaft structure and a double-anchor pre-relay method, minimizing thermal displacement and significantly enhancing machining accuracy. The machine's high-rigidity, large-size, heavy-duty linear slide rails maintain accuracy even under impact, with smooth displacement and low noise, prolonging its service life.
4.Standard configuration includes the state-of-the-art FANUC system, with the feed drive powered by a FANUC servo motor.
5.Sophisticated hydraulic and lubrication system, featuring high-quality hydraulic pumps, valves, and other components, which significantly reduce the failure rate. The design of this system is both simple and reliable.
6.Utilizes high-quality Taiwan rotary chuck, oil cylinder, and an automatic chip removal device, which collectively reduce operator labor intensity and ensure safe and efficient production. These functional components are programmable for streamlined operation. Special fixture options available.
| Name | Unit | SY200MS |
| The largest diameter rotating bed | mm | Ф600 |
| Max processing diameter | mm | Ф400 |
| Max.Swing Over Cross Slide | mm | Ф300 |
| Max processing length | mm | 290 |
| Bar diameter | mm | Ф45/45 |
| Spindle nose | / | A2-5 |
| Spindle hole diame | mm | Ф56 |
| Max speed of spindle | rpm | 5500 |
| Spindle motor power | kw | 11 |
| Spindle motor power | Nm | 61-125 |
| Hydraulic Cylinder/Chuck | / | 6" |
| Spindle nose | / | A2-5 |
| Spindle hole diame | mm | Ф56 |
| Max speed of spindle | rpm | 5500 |
| Spindle motor power | kw | 11 |
| Spindle motor power | Nm | 61-125 |
| Hydraulic Cylinder/Chuck | / | 6" |
| X/Z/S motor power | kw | 2.4/2.4/1.8 |
| X/Z/S travel | mm | 240/230/360 |
| X/Z/Y/S axis moving fast | mm/min | 20/20/20 |
| Slide rail type | mm | 35 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| The Tool tower type | mm/pcs | BMT55-12T |
| Power cutter tower motor | Kw | 5 |
| Max speed of spindle | rpm | 5000 |
| The tool biock specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф40 |
| The adjacent tool change time | sec | 0.15 |
| Machine size | mm | 2600*2100*1900 |
| Machine Weight | kg | 4500 |
| Cutting fluid tank volume | L | 150 |
| Volume of hydraulic unit box | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2L |
| Auto lube pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
){kind=link}