The machine adopts an optimized 30-degree inclined structure design, which also has high precision, super rigidity and excellent cutting.
stability. High-strength HT300 cast iron one-piece solid structure lathe, using finite element analysis, the overall machine
It has excellent rigidity and stability, and can maintain long-term reliable accuracy, improve processing stability and tool life, and eliminate stress.
In addition to improving precision and stability, the high-strength roller linear rail design structure and the transmission system adopts screw pre-tension design to improve
Reflecting rigid performance, the simple and elegant appearance is in line with the trend.
Main features of this machine tool:
1. Adopting a 30° inclined layout and an integrated structure of the bed base, which greatly improves the bending and torsional rigidity of the machine tool during operation. The high rigidity and high stability of the integrated bed base provide high precision for the entire machine. A strong guarantee.
2. Adopt direct drive synchronous spindle device: magnetic ring incremental encoder (sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds. Effectively eliminate spindle vibration, and the nose deflection accuracy is within 0.002MM. Improve the surface finish of the workpiece, adopt a rear-mounted rotor, which makes installation and maintenance faster, the spindle motor is equipped with a cooling system to suppress the influence of thermal displacement and ensure a constant operating temperature of the spindle. The spindle system has undergone strict dynamic balance testing. The good accuracy retention, high rigidity and high efficiency enable the whole machine to not only complete finishing, but also perform rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high smoothness. product.
3. High rigidity overall design servo turret. Equipped with a high-precision clutch to ensure its positioning accuracy and repeatable positioning accuracy. It is equipped with a servo motor to drive the cutterhead to rotate for bi-directional or arbitrary tool selection. The hydraulic principle is used to loosen and clamp the clutch, and the proximity switch feedbacks the clutch action signal to quickly and accurately achieve the tool change action.
4. The machine tool is equipped with roller linear guides and ball screws. The heat-treated and precision-ground ball screws can ensure the best accuracy and durability. Each axis adopts a direct transfer axis structure and a double-anchor pre-relay method to ensure thermal stability. The amount of displacement is minimized, greatly improving processing accuracy. The high-rigidity, large-sized, heavy-duty linear slide rails maintain intact accuracy when the machine is subjected to impact, and the displacement is smooth and low-noise, which can extend the service life.
5. Programmable hydraulic tailstock and high rigidity integral tailstock can eliminate vibration and have good stability. Programmable or manual button control, convenient, fast and reliable.
6. This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components to greatly reduce the failure rate. The hydraulic and lubrication systems are designed to be simple and reliable. The machine tool adopts centralized quantitative automatic lubrication.
7. It adopts Taiwan rotary chuck cylinder and optional automatic chip removal device, which can greatly reduce the labor intensity of the operator and achieve safe and efficient production. The above functional components can be programmed and controlled, and various functions can be designed and installed according to the special requirements of the user. A special fixture.
Product Parameters
| Name |
Unit |
108/E |
| Maximum turning diameter on the bed |
mm |
Φ600 |
| Maximum processing diameter |
mm |
Φ400 |
| Maximum processing diameter on the tool holder |
mm |
Φ220 |
| Maximum processing length |
mm |
350 |
| Distance Between Centers |
mm |
380 |
| Spindle nose |
type |
A2-6 |
| Maximum speed of spindle |
rpm |
4500 |
| Spindle bore |
mm |
Φ65 |
| Oil cylinder/chuck |
lnch |
8″ |
| Bar diameter |
mm |
Φ52 |
| Direct drive motor spindle power |
kw |
22KW |
| X/Z travel |
mm |
220/380 |
| X/Z linear guide specification |
spes |
35 roller |
| X/Z motor power |
kw |
1.8KW |
| X/Z Positioning accuracy |
mm |
±0.005 |
| X/Z Repeat positioning accuracy |
mm |
±0.003 |
| X/Z rapid traverse |
m/min |
30/30 |
| Opposite side of cutter/Tool position |
mm/pcs |
360/10T12T |
| Outer diameter tool holder specifications |
mm |
25X25 |
| Inner diameter tool holder specification |
mm |
Ф40 |
| Adjacent tool change time |
sec |
0.15 |
| Servo turret Positioning accuracy |
/ |
±2" |
| Servo turret repeat positioning accuracy |
/ |
±1" |
| Programmable hydraulic tailstock |
/ |
Programmable |
| Maximum travel of tailstock |
mm |
360 |
| Tailstock sleeve taper hole |
type |
Mohs 5# |
| Tailstock sleeve diameter |
mm |
Ф100 |
| Sleeve stroke |
mm |
100 |
| Machine size(length*width*height) |
mm |
Appro.2300x1800x1700 |
| Machine weight |
kg |
Appro.3700kg |
| Cutting fluid tank volume |
L |
89L |
| Cutting water pump |
kw |
0.75kw |
Products Configurations
Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best model for you,or you can choose the exact model,you can also send us the products drawing,we will choose the most suitable machines for you .
Q2: What's your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe Machine ,CNC Milling Machine,CNC Turning Maching,Vertical Machining Center ,Horizontal Machining Center,Lathe Machines,Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong.You are warmly welcomed to visit us.
Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA
Q5: What's the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment before shipment .
06: What's the MoQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
We want to know:
1.We strongly suggest you to tell us size, material of your workpiece for our evaluation if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
2.lf need ClF Price, please kindly tell us the port of destination.
Audited Supplier 
){kind=link}