| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted from high-strength HT300 one-piecestructurecastironbed, featuring a robust 30-degree steptypeflat rail structure. With advanced finite element analysis, it offers exceptional mechanical rigidity and stability, ensuring long-term reliable accuracy, processing consistency, and extended tool life. Stress relief treatment furtherenhances accuracy and stability. The high-strength roller rail design, combined with a screw pre-tension drive system, boosts response rigidity.Simultaneousprocessing at both ends of the workpiece in one clamping significantly simplifies manual operations, increases output, and streamlines processes. The second spindle, equipped for full turning, can manipulate workpieces during machining, cutting cycle times.
1.
Direct drive synchronous electric spindle device: Magnetic ringtypeincremental encoder (Sine and cosine). Positioning accuracy: 20 arc seconds. C-axis indexing accuracy: 40 arc seconds.Effectively eliminates spindle
vibration, maintaining nose end deflection accuracy within 0.002mm,improvingworkpiece surface finish.
The rear-mounted rotor design facilitates installation and maintenance.
The spindle motor is equipped with an advanced cooling system to minimize thermal displacement, ensuring a stable working temperature. The spindle system has undergone rigorous dynamic balance testing, ensuring precision retention, high rigidity, and efficiency. This allows the machine to excel in both finishing and rough machining, making it ideal for mass production of complex, high-finish products.
2. High-rigidity integral servo power turret with swift and precise tool change performance. The high-rigidity BMT interface for the tool holder and the servo spindle motor-driven power transmission shaft ensures stability.
3. Equipped with THK linear guide rail and ball screw, the heat-treated and precision-ground ball screw ensures optimal precision and durability. The direct transfer shaft structure and double-anchor pre-relay method minimize thermal displacement, enhancing machining accuracy. The high-rigidity, large-size, heavy-duty linear slide rails maintain machine accuracy, ensuring smooth displacement and low noise, thus extending service life.
4. Standard configuration with FANUC system, featuring FANUC servo motor for feed drive.
5. The sophisticated hydraulic and lubrication system uses premium hydraulic pumps, valves, and other components to drastically reduce failure rates. The design is both simple and reliable.
6. Incorporating a Taiwan rotary chuck, oil cylinder, and automatic chip removal device significantly reduces operator labor intensity, promoting safe and efficient production. These components can be controlled via programming, including special fixtures.
| Item | Unit | 800MS/E |
| Max.turning diameter over bed | mm | Φ700 |
| Max.processing diameter | mm | Φ540 |
| Max.processing diameter over tool holder | mm | Φ350 |
| Max.processing length | mm | 650 |
| Spindle nose | / | A2-6 |
| Oil cylinder/chuck | / | 8″ |
| Spindle bore diameter | mm | Φ66 |
| Bar diameter | mm | Φ52 |
| Max.speed of spindle | rpm | 4300 |
| Direct drive spindle motor power | kw | 18/22 |
| Spindle motor torque | N.m | 91-227 |
| Sub-spindle nose | / | A2-6 |
| Oil cylinder/chuck | / | 8″ |
| Sub-spindle bore diameter | mm | Φ66 |
| Bar diameter | mm | Φ52 |
| Max.speed of Sub-spindle | rpm | 4300 |
| Sub-spindle motor power | kw | 18/22 |
| Sub-spindle motor torque | N.m | 91-227 |
| X/Z/S motor power | kw | 3.0/3.0/3.0 |
| X/Z/S axis travel | mm | 320/740/650 |
| X/Z/S axis moving fast | mm/min | 24/24/24 |
| Slide rail type | / | 45/45/35 roller |
| X/Z/S shaft wire specifications | mm | 4012 |
| Power turret type | / | BMT55-12T |
| Power turret power/torque | Kw/N.m | 5.5/35 |
| Max.speed of power tool holder | rpm | 6000 |
| Outer diameter tool holder specification | mm | 25X25 |
| Inner diameter tool holder specification | mm | Φ40 |
| Adjacent tool change time | sec | 0.2 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Machine dimension | mm | 3500x2110x2100 |
| Machine weight | kg | 7000 |
| Cutting fluid tank volume | L | 250 |
| Cooling water pump power | W | 750 |
| Hydraulic unit box volume | L | 40 |
| Lubricant tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
Q1: How can I choose the most suitable machines?
Simply provide us with your specifications, and we will recommend the best model for you. If you have a particular model in mind, you can select it yourself. Additionally, sending us the product drawings will help us find the most suitable machine for your needs.
Q2: What are your company's main products?
Our expertise lies in a diverse range of machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and Turning and Milling Composite Processing equipment, among others.
Q3: Where is your factory located, and how can I visit?
We proudly operate five factories situated in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit any of our locations.
Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA to meet your needs.
Q5: What are the payment terms?
Our payment terms are T/T, with a 30% initial payment upon order and the remaining 70% balance due before shipment.
Q6: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is 1 set. However, for some low-cost machines, the MOQ may be more than one set.
We would like to know:
1. We highly recommend providing us with the size and material of your workpiece for evaluation. Sending us the workpiece drawing would be even better, as it helps us suggest the most suitable model for you.
2. If you require a CIF price, please kindly provide us with the port of destination.
){kind=link}