| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Experience the unparalleled strength of our HT300 high-strength one-piecestructurecastingironbed, featuring a robust 30-degree steptypeflat rail design. Using advanced finite element analysis, the bed delivers exceptional rigidity and stability, ensuring long-term precision, processing consistency, and extended tool life. A stress relief treatment enhances accuracy and stability. The high-strength roller rail and screw pre-tension drive system further amplify response rigidity.toboost accuracy and stability, our machine incorporates a high-strength roller rail design and a pre-tensioned screw drive system, enhancing the overall response and rigidity.
Both ends of the workpiece can be machined simultaneously, significantly simplifying manual operations, boosting output, and streamlining processes. The second spindle delivers full turning capabilities and allows for real-time workpiece expression during machining, drastically reducing cycle times.
1.Direct drive synchronous electric spindle device: featuring a magnetic ringtypeincremental encoder (Sine and cosine) with positioning accuracy of 20 arc seconds and C-axis indexing accuracy of 40 arc seconds.
This innovation effectively eliminates spindlevibration, maintaining nose end deflection accuracy within 0.002mm. It significantly enhances workpiece surface finish.
A rear-mounted rotor facilitates easy installation and maintenance.
The spindle motor features a cooling system to counteract thermal displacement, stabilizing the spindle's working temperature. The spindle system, having passed stringent dynamic balance tests, offers excellent precision retention, high rigidity, and efficiency. This enables the machine to perform both finishing and heavy-duty rough machining, perfect for mass production of complex, high-finish parts.products.
2. High rigidity integral servo power turret with rapid and precise tool changes. The high-rigidity BMT interface tool holder, combined with a servo spindle motor-driven power transmission shaft, ensures exceptional performance.
3. Equipped with THK linear guide rails and ball screws, the heat-treated and precision-ground ball screws ensure optimal precision and durability. Each axis uses a direct transfer shaft structure and double-anchor pre-relay system to minimize thermal displacement and significantly improve machining accuracy. The machine's high rigidity, large size, and heavy-duty linear slide rails maintain accuracy even under impact, providing smooth displacement and low noise, thereby extending service life.
4. Standard configuration includes the FANUC system, with feed drive powered by a FANUC servo motor.
5. The perfect hydraulic and lubrication system utilizes high-quality hydraulic pumps and valves, significantly reducing failure rates. The design is both simple and reliable.
6. Featuring a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, the machine greatly reduces operator labor intensity while ensuring safe and efficient production. All functional components are programmable for optimal control. Special fixtures are available upon request.
| Item | Unit | 150MS-II/E |
| Max. swing diameter over bed | mm | Ф380 |
| Max. processing diameter | mm | Ф100 |
| Max. processing diameter Over tool holder |
mm | Ф160 |
| Max. processing length | mm | 150 |
| Spindle nose | type | A2-5 |
| Max. speed of spindle | rpm | 5500 |
| Oil cylinder/Chuck | " | 6 |
| Spindle bore diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Direct drive spindle motor power | kw | 17.5 |
| Spindle torque | N.m | 62-125 |
| Sub spindle nose | type | A2-4 |
| Max. speed of Sub spindle | rpm | 6000 |
| Oil cylinder/collect | " | 5 |
| Sub spindle bore diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Direct drive sub spindle motor power | kw | 11 |
| Sub spindle torque | N.m | 27-66 |
| X1/Z1 motor power | kw | 1.8/1.2 |
| X2/Z2 motor power | kw | 1.2/1.2 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
| X1/Z1 slide rail type | / | Roller 35/35 |
| X2/Z2 slide rail type | / | Roller 30/30 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Upper power turret type | / | BMT45-12T |
| Upper power turret motor | Kw/N.m | 2.2/26 |
| Max. speed of upper power turret | rpm | 6000 ER20 |
| Specification of outer diameter tool holder | mm | 20x20 |
| Specification of inner diameter tool holder | mm | Ф32 |
| Adjacent tool change time | sec | 0.15 |
| Lower turret type | / | NC8T |
| Max. speed of lower power turret | mm | 25x25 |
| Specification of outer diameter tool holder | mm | Ф32 |
| Specification of inner diameter tool holder | sec | 0.15 |
| Machine dimension | m | 2.2x2.1x1.7 |
| Machine weight | kg | 3200 |
| Cutting fluid tank volume | L | 180 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricant oil tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
Please provide your specifications, and we will select the best model for you. Alternatively, you can choose the exact model yourself. You may also send us the product drawing, and we will recommend the most suitable machines for your requirements.
Q2: What are the main products of your company?
We specialize in a wide range of machinery including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical and Horizontal Machining Centers, Lathe Machines, and Turning and Milling Composite Processing Centers.
Q3: Where is your factory located, and how can I visit?
We have five factories situated in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly welcomed to visit us at any of these locations.
Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
Our payment terms are T/T with a 30% initial payment upon ordering and the remaining 70% balance due before shipment.
Q6: What is the minimum order quantity (MOQ)?
A: The MOQ is 1 set. However, for some low-cost machines, the MOQ may be more than 1 set.
We would like to know:
1. We strongly suggest providing the size and material of your workpiece for our evaluation. If possible, please send us the workpiece drawing so that we can recommend the most suitable model for your needs.
2. If you require a CIF price, please kindly inform us of the port of destination.
){kind=link}