| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted with a high-strength HT300 one-piecestructurecastingironbed, featuring a 30-degree steptypeflat rail structure. The application of finite element analysis ensures excellent overall mechanical rigidity and stability, maintaining long-term reliable accuracy, processing stability, and tool longevity. Stress relief treatment further enhancesimproves accuracy and stability. The high-strength roller rail design and screw pre-tension drive system boost response rigidity.
Both ends of the workpiece can be processed simultaneously in one clamping, greatly simplifying manual operations, boosting output, and reducing processing steps. The second spindle can fully turn, allowing workpieces to be expressed during machining, thus reducing cycle times.
1.Direct drive synchronous electric spindle device: features a magnetic ringtypeincremental encoder (Sine and cosine) with a positioning accuracy of 20 arc seconds and a C-axis indexing accuracy of 40 arc seconds.
Effectively eliminates spindlevibration, ensuring the deflection accuracy of the nose end is within 0.002mm, improving the surface finish of the workpiece.
The rear-mounted rotor facilitates easy installation and maintenance.
The spindle motor is equipped with a cooling system to mitigate thermal displacement, ensuring a constant working temperature. The spindle system has undergone rigorous dynamic balance tests, offering excellent precision retention, high rigidity, and efficiency. This enables the machine to perform both finishing and rough machining, accommodating heavy cuts. Ideal for mass production of complex shapes requiring high finish,products.
2. High-rigidity integral servo power turret ensures rapid and precise tool changes. The tool holder installation utilizes a high-rigidity BMT interface, and the power transmission shaft is driven by a servo spindle motor.
3. Equipped with THK linear guide rails and ball screws. The heat-treated and precision-ground ball screw guarantees optimal precision and durability. Each axis features a direct transfer shaft structure and double-anchor pre-relay method, significantly reducing thermal displacement and improving machining accuracy. The high-rigidity, large-size, heavy-duty linear slide rails maintain machine accuracy even under impact, ensuring smooth displacement and low noise, which prolongs service life.
4. Standard configuration includes the FANUC system, with the feed drive utilizing a FANUC servo motor.
5. The perfect hydraulic and lubrication system employs high-quality hydraulic pumps, valves, and other components, greatly reducing failure rates. The system's design is simple and reliable.
6. Features a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, significantly reducing operator labor intensity and enabling safe, efficient production. These components are programmable and include a special fixture.
| Item | Unit | 150MS-III/E |
| Max.swing diameter over bed | mm | Ф380 |
| Max.processing diameter | mm | Ф100 |
| Max.processing diameter Over tool holder |
mm | Ф160 |
| Max.processing length | mm | 150 |
| Spindle nose | type | A2-5 |
| Max.speed of spindle | rpm | 5500 |
| Oil cylinder/Chuck | " | 6 |
| Spindle bore diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Direct drive spindle motor power | kw | 17.5 |
| Spindle torque | N.m | 62-125 |
| Sub spindle nose | type | A2-4 |
| Max.speed of Sub spindle | rpm | 6000 |
| Oil cylinder/collect | " | 5 |
| Sub spindle bore diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Direct drive sub spindle motor power | kw | 11 |
| Sub spindle torque | N.m | 27-66 |
| X1/Z1 motor power | kw | 1.8/1.2 |
| X2/Z2 motor power | kw | 1.2/1.2 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
| X1/Z1 slide rail type | / | Roller 35/35 |
| X2/Z2 slide rail type | / | Roller 30/30 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Upper power turret type | / | BMT45-12T |
| Upper power turret motor | Kw/N.m | 2.2/26 |
| Max.speed of upper power turret | rpm | 6000 ER20 |
| Specification of outer diameter tool holder | mm | 20x20 |
| Specification of inner diameter tool holder | mm | Ф32 |
| Adjacent tool change time | sec | 0.15 |
| Lower power turret type | / | BMT40-8T |
| Lower power turret motor | Kw/N.m | 2.2/26 |
| Max.speed of lower power turret | rpm | 6000 ER20 |
| Max.speed of lower power turret | mm | 20x20 |
| Specification of outer diameter tool holder | mm | Ф25 |
| Specification of inner diameter tool holder | sec | 0.15 |
| Machine dimension | m | 2.2x2.1x1.7 |
| Machine weight | kg | 3500 |
| Cutting fluid tank volume | L | 180 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricant oil tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
Please provide us with your precise specifications so that we can recommend the ideal model for you. Alternatively, you can choose a model directly, or send us product drawings, and we will select the most suitable machine for your needs.
Q2: What are the main products of your company?
We specialize in a wide range of machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and turnkey solutions for turning and milling composite processing.
Q3: Where is your factory located? How can I visit?
Our factories are strategically located in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly invited to visit us at any of these locations.
Q4. How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA options to suit your needs.
Q5: What are the payment terms?
Our payment terms are T/T with 30% initial payment upon order and 70% balance payment before shipment.
Q6: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is 1 set, with some exceptions for low-cost machines which may require more than one set.
We would like to know:
1. We strongly suggest providing the size and material of your workpiece for our evaluation. If possible, please send us the workpiece drawing so we can recommend the most suitable model for your application.
2. If you need a CIF price, please kindly specify the port of destination.
){kind=link}