| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-strength HT300 one-piecestructurecastingironbed, 30-degree steptypeflat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatmentimprove accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed at the same time in one clamping, which greatly simplifies the manual operation, increases the output and reduces the process. The second spindle is capable of full turning and can express workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ringtypeincremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminate the vibration ofspindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.
The rear-mounted rotor is used to facilitate installation and maintenance.
The spindle motor is equipped with cooling system to suppress the influence of thermal displacement and ensure a constant working temperature of the spindle. The spindle system has passed the strict dynamic balance test. It has good precision retention, high rigidity and high efficiency, so that the machine can not only complete finishing machining, but also rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high finishproduct.
2. High rigidity integral servo power turret. With rapid and precise tool change performance. The tool holder installation used high-rigidity BMT interface, and the power transmission shaft is driven by servo spindle motor.
3. The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw can ensure the best precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy. High rigidity, large size, and heavy-duty linear slide rails can keep the accuracy of the machine unaffected when it is impacted, the displacement is smooth and the noise is low, which can prolong the service life.
4. Standard configuration FANUC system, and the feed drive adopts FANUC servo motor.
5. Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.
6. Using Taiwan rotary chuck, oil cylinder and automatic chip removal device, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. Special fixture.
| Item | Unit | 150MS-II/E |
| Max. swing diameter over bed | mm | Ф380 |
| Max. processing diameter | mm | Ф100 |
| Max. processing diameter Over tool holder |
mm | Ф160 |
| Max. processing length | mm | 150 |
| Spindle nose | type | A2-5 |
| Max. speed of spindle | rpm | 5500 |
| Oil cylinder/Chuck | " | 6 |
| Spindle bore diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Direct drive spindle motor power | kw | 17.5 |
| Spindle torque | N.m | 62-125 |
| Sub spindle nose | type | A2-4 |
| Max. speed of Sub spindle | rpm | 6000 |
| Oil cylinder/collect | " | 5 |
| Sub spindle bore diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Direct drive sub spindle motor power | kw | 11 |
| Sub spindle torque | N.m | 27-66 |
| X1/Z1 motor power | kw | 1.8/1.2 |
| X2/Z2 motor power | kw | 1.2/1.2 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
| X1/Z1 slide rail type | / | Roller 35/35 |
| X2/Z2 slide rail type | / | Roller 30/30 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Upper power turret type | / | BMT45-12T |
| Upper power turret motor | Kw/N.m | 2.2/26 |
| Max. speed of upper power turret | rpm | 6000 ER20 |
| Specification of outer diameter tool holder | mm | 20x20 |
| Specification of inner diameter tool holder | mm | Ф32 |
| Adjacent tool change time | sec | 0.15 |
| Lower turret type | / | NC8T |
| Max. speed of lower power turret | mm | 25x25 |
| Specification of outer diameter tool holder | mm | Ф32 |
| Specification of inner diameter tool holder | sec | 0.15 |
| Machine dimension | m | 2.2x2.1x1.7 |
| Machine weight | kg | 3200 |
| Cutting fluid tank volume | L | 180 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricant oil tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
Simply share your specifications with us, and we will identify the perfect model for your needs. Alternatively, you can select a model yourself, or send us your product drawings. Our experts will then recommend the most suitable machinery for you.
Q2: What are your company's main products?
We specialize in a diverse range of high-tech machinery, including: CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and advanced Turning and Milling Composite Processing solutions.
Q3: Where is your factory located, and how can I visit?
Our state-of-the-art factories are strategically located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us at any of these locations.
Q4: How do you handle transportation?
We offer flexible transportation options including DDP, CIF, FOB, and FCA to ensure your order arrives safely and promptly.
Q5: What are the Payment Terms?
Our payment terms are straightforward: 30% initial payment upon order confirmation, and the remaining 70% balance prior to shipment, all via T/T.
Q6: What is the Minimum Order Quantity (MoQ)?
A: Our MoQ is generally 1 set, though some lower-cost machines may have a higher minimum order requirement.
We want to know:
1. We highly recommend you provide us with the size and material details of your workpiece, if possible. Sending us a workpiece drawing will allow us to recommend the most suitable model for your specific needs.
2. If you require a CIF price, please kindly provide us with the port of destination.
){kind=link}