| After-sales Service: | Support |
|---|---|
| Warranty: | One Year |
| Type: | Turret Lathe |
| Processing Accessory: | Chuck CNC Lathe |
| Guide Rail: | Inclined Guide Rail |
| Tool Holder: | Double-tool Holder CNC Lathe |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
High-strength HT300 one-piece structure castingiron bed, 30-degree steptypeflat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed at the same time in one clamping, which greatly simplifies the manual operation, increases the output and reduces the process. The second spindle is capable of full turning and can express workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminate the vibration ofspindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.
The rear-mounted rotor is used to facilitate installation and maintenance.
The spindle motor is equipped with a cooling system to suppress the influence of thermal displacement and ensure a constant working temperature of the spindle. The spindle system has passed the strict dynamic balance test, ensuring good precision retention, high rigidity, and high efficiency. This allows the machine to perform both fine finishing and heavy-duty rough machining, making it especially suitable for mass production of complex shapes with high finishproduct.
2. High rigidity integral servo power turret. With rapid and precise tool change performance. The tool holder installation uses a high-rigidity BMT interface, and the power transmission shaft is driven by a servo spindle motor.
3. The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw ensures optimal precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, minimizing thermal displacement and significantly improving machining accuracy. High rigidity, large size, and heavy-duty linear slide rails maintain the machine's accuracy under impact, ensure smooth displacement, low noise, and prolong service life.
4. Standard configuration FANUC system, with the feed drive adopting the FANUC servo motor.
5. Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves, and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.
6. Equipped with a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, which significantly reduces the labor intensity of the operator while ensuring safe and efficient production. These functional components can be controlled via programming. Special fixture.
| Name | Unit | SY150MS-II |
| The largest diameter rotating bed | mm | Ф380 |
| Max. processing diameter | mm | Ф100 |
| Max.Swing Over Cross Slide | mm | Ф160 |
| Max. processing length | mm | 150 |
| Spindle nose | / | A2-5 |
| Max. speed of spindle | rpm | 6000 |
| Hydraulic Cylinder/Chuck | / | 6" |
| Spindle hole diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Spindle motor power | kw | 11 |
| Spindle motor torque | Nm | 61-125 |
| Spindle nose | / | A2-4 |
| Max. speed of spindle | rpm | 6000 |
| Hydraulic Cylinder/Chuck | / | 5" |
| Spindle hole diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Spindle motor power | kw | 11 |
| Spindle motor power | Nm | 34-67 |
| X1/Z1 motor power | kw | 1.8/1.8 |
| X2/Z2 motor power | kw | 1.3/1.3 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| X/Z/S axis moving fast | mm/min | 30/30/30 |
| Slide rail type | mm | Roller 35/35 |
| Slide rail type | mm | Roller 30/30 |
| Turret type | pcs | BMT45-12T |
| Power motor | Kw | 4.0kw |
| Max. speed of | rpm | 5000 ER20 |
| The tool block specifications | mm | 20x20 |
| Circular cutter holder specification | mm | Ф32 |
| The adjacent tool change time | sec | 0.15 |
| Turret type | pcs | NC8T |
| Tool block specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф32 |
| The adjacent tool change time | sec | 0.15 |
| Machine size | m | 2.2x2.1x1.7 |
| Machine Weight | kg | 3500 |
| Cutting fluid tank volume | L | 150 |
| Volume of hydraulic unit box | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1:How can l choose the most suitable machines ?
Please provide your specifications, and we will choose the best model for you. Alternatively, you can select the exact model yourself. If you send us the product drawings, we will ensure you get the most suitable machines.
Q2: What's your main products of your company?
We specialize in a variety of machines such as CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and composite processing equipment for turning and milling.
Q3: Where is our factory located? How can l visit there?
Our factories are located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us.
Q4. How do you transport it?
We provide transportation solutions such as DDP, CIF, FOB, and FCA.
Q5: What's the Payment Terms ?
Payment terms are T/T, with a 30% initial payment upon order and a 70% balance payment before shipment.
Q6: What's the MoQ?
A: The Minimum Order Quantity is 1 set. However, for some low-cost machines, the MoQ may be more than 1 set.
We want to know:
1. We strongly recommend you provide the size and material of your workpiece for our evaluation. It is even better if you can send us the workpiece drawing, so we can suggest the most suitable model!
2. If you need CIF pricing, kindly provide the port of destination.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}