| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The two-axis lathe can process both ends of the workpiece at the same time in one clamping, which greatly simplifies manual operations, increases output, and reduces processes. The second spindle enables full turning and expressly transfers workpieces during machining, thereby reducing cycle times. The machine adopts an optimized 30-degree inclined structure design, which also has high precision, super rigidity, and excellent cutting stability. The strong structural lathe bed is made of one-piece high-strength HT300 cast iron and uses finite element analysis. The overall mechanical rigidity and stability are excellent, maintaining long-term reliable accuracy, improving processing stability and tool life. Stress relief treatment further enhances accuracy stability. The high-strength roller linear rail design structure and the transmission system utilize a screw pre-tension design to improve rigidity performance. The simple and elegant appearance aligns with modern industrial trends.
Main features of this machine tool:
1. Adopt direct drive synchronous electric spindle device: magnetic ring incremental encoder (sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds. Effectively eliminate spindle vibration, and the nose deflection accuracy is within 0.002MM. Improve the surface finish of the workpiece, adopt a rear-mounted rotor, which makes installation and maintenance faster. The spindle motor is equipped with a cooling system to suppress the influence of thermal displacement and ensure a constant operating temperature of the spindle. The spindle system has undergone strict dynamic balance testing. The good accuracy retention, high rigidity, and high efficiency enable the whole machine to not only complete finishing but also perform rough machining and heavy cutting. It is especially suitable for mass production of complex shapes and high smoothness products.
2. High rigidity integrated design servo power turret. It enhances the servo turret's rapid and accurate tool changing performance, and when coupled with the power milling of a high-speed power axis, it achieves excellent turning and milling combined processing capabilities. The tool holder is installed using a high-rigidity BMT installation interface, and the power transmission shaft is driven by a servo spindle motor.
3. The machine tool is equipped with roller linear guides and ball screws. The heat-treated and precision-ground ball screws ensure the best accuracy and durability. Each axis adopts a direct transfer axis structure and a double-anchor pre-relay method, minimizing the heat displacement, greatly improving processing accuracy. The high-rigidity, large-sized, heavy-duty linear slide rails maintain intact accuracy when the machine is subjected to impact, and the displacement is smooth and low-noise, extending the service life.
4. This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves, and other components to greatly reduce the failure rate. The hydraulic and lubrication systems are designed to be simple and reliable.
5. It adopts Taiwan rotary chuck cylinder and optional automatic chip removal device, which can greatly reduce the labor intensity of the operator and achieve safe and efficient production. The aforementioned functional components can be programmed and controlled, and various functions can be designed and installed according to the specific requirements of the user.special fixture.
| Item | Unit | SY1200M/E |
| Max. swing diameter over bed | mm | Φ600 |
| Max. processing diameter | mm | Φ500 |
| Max. processing diameter over tool holder | mm | Φ300 |
| Max. processing length | mm | 1000 |
| Spindle type | type | A2-8 |
| Max. spindle speed | rpm | 2100 |
| Hydraulic Cylinder/ Chuck | lnch | 10″ |
| Spindle bore diameter | mm | Φ86 |
| Max. bar diameter | mm | Φ72 |
| Direct drive spindle motor power | kw | 24 |
| Direct drive spindle motor torque | Nm | 160-390 |
| X/Z axis travel | mm | 320/1140 |
| X/Z axis rail specifications | spes | Roller45 |
| X/Z axis motor power | kw | 2.9 |
| Positioning accuracy | mm | ±0.005 |
| Repeatability | mm | ±0.003 |
| X/Z axis rapid speed | m/min | 24/24 |
| Power turret type | pcs | BMT65-12T |
| Power turret motor | KW | 5.0 |
| Max. power tool holder speed | rpm | 5000 |
| External diameter tool holder specification | mm | 25X25 |
| Internal diameter tool holder specification | mm | Φ50 |
| Adjacent tool change time | sec | 0.2 |
| Programmable hydraulic tailstock | / | Hydraulic tailstock |
| Max. Tailstock travel | mm | 800 |
| Tailstock sleeve tapered hole | type | Mohs5# |
| Sleeve diameter | mm | Ф100 |
| Sleeve travel | mm | Fixed |
| Machine size | mm | 3900x2110x2100 |
| Machine weight | kg | 7000 |
| Cutting fluid tank volume | L | 300 |
| Cutting coolant water pump | kw | 0.75 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricat tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Coolant water pump power | W | 1.5 |
Q1: How can I choose the most suitable machines?
Please provide us with your specifications, so we can recommend the best model for you. Alternatively, you can select a model directly, or send us your product drawings, and we will choose the most suitable machines for you.
Q2: What are the main products of your company?
We specialize in a wide range of machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and Turning and Milling Composite Processing machines, among others.
Q3: Where is your factory located? How can I visit?
We have five factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly welcomed to visit any of our locations.
Q4. How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
Our payment terms are T/T, with a 30% initial payment when the order is placed and the remaining 70% balance before shipment.
Q6: What is the MoQ?
A: Our minimum order quantity is 1 set. (For some low-cost machines, the MoQ may be more than 1 set).
We want to know:
1. We strongly recommend providing the size and material of your workpiece for our evaluation. If possible, please send us a drawing of the workpiece so that we can recommend the most suitable model!
2. If you need a CIF price, please kindly inform us of the port of destination.
){kind=link}