High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
1.The spindle unit system has undergone strict dynamic balance tests, with high precision, good precision retention, small thermal deformation, and good thermal stability. The maximum speed can reach 3200rpm, and the nose deflection accuracy is within 0.003MM. The front end of the shaft uses a large-diameter high-precision double-row roller bearing with a combined oblique contact ball bearing structure. The optimal span two-point balanced support design can withstand radial and axial loads, and can also be used for high-speed precision for users. Cutting can also be used for low-speed heavy cutting, especially suitable for mass production of products with complex shapes, high precision requirements and high finish.
2.High rigidity overall design servo turret. Equipped with a high-precision clutch to ensure its positioning accuracy and repeat positioning accuracy. Use the servo motor to drive the cutter head to rotate for two-way or any nearby tool selection, use the hydraulic principle to loosen and clamp the clutch, and cooperate with the proximity switch to feedback the clutch action signal to quickly and accurately achieve the tool change action.
3.The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw can ensure the best precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy. High rigidity, large size, and heavy-duty linear slide rails can keep the accuracy of the machine unaffected when it is impacted, the displacement is smooth and the noise is low, which can prolong the service life.
4.Standard configuration FANUC system, and the feed drive adopts FANUC servo motor.
5.Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.
6.Integral hydraulic tailstock with high rigidity structure can eliminate vibration and provide excellent stability. Programmable or manual button control, the expansion and contraction of the sleeve is realized by means of hydraulic cylinder, which is convenient, fast and reliable.
7.Using Taiwan rotary chuck, oil cylinder and automatic chip removal device, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. Special fixture.
| Item |
Unit |
TY1200/E |
| The largest diameter rotating bed |
mm |
Φ700 |
| Max. processing diameter |
mm |
Φ640 |
| Max.Swing Over Cross Slide |
mm |
Φ350 |
| Max. processing length |
mm |
1150 |
| Spindle nose |
type |
A2-8 |
| Max. speed of spindle |
rpm |
3200 |
| Hydraulic Cylinder/Chuck |
lnch |
10″ |
| Spindle hole diameter |
mm |
Φ86 |
| Bar diameter |
mm |
Φ76 |
| Spindle motor power biIP30 |
Kw |
15/18.5 |
| Spindle motor power1:1.4 |
Nm |
200/330 |
| X/Z travel |
mm |
330/1200 |
| X/Z axis rail specification |
spes |
45 roller |
| X/Z shaft wire specifications |
mm |
4012 |
| X/Z motor power |
kw |
3.0 |
| Positioning accuracy |
mm |
±0.005 |
| Repeat positioning accuracy |
mm |
±0.003 |
| X/Z axis moving fast |
m/min |
24/24 |
| Tool position |
pcs |
12T |
| The knife biock specifications |
mm |
25X25 |
| Circular cutter holder specification |
mm |
Ф50 |
| The adjacent tool change time |
sec |
0.2 |
| Hydraulic tail seat |
/ |
Hydraulic tailstock |
| The biggest stroke of the tail |
mm |
970 |
| Morse Slide way |
type |
Morse 5# |
| Sleeve diameter |
mm |
Ф100 |
| Sleeve travel |
mm |
100 |
| Machine size |
mm |
3900*2110*2100 |
| Machine Weight |
kg |
7200 |
| Cutting fluid tank volume |
L |
300 |
| Cooling water pump power |
W |
750 |
| Volume of hydraulic unit box |
L |
45 |
| Hydraulic oil pump motor power |
kw |
1.5 |
| Volume of lubricating oil tank |
L |
2 |
| Auto lube pump motor power |
W |
50 |
Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best model for you,or you can choose the exact model,you can also send us the products drawing,we will choose the most suitable machines for you .
Q2: What's your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe Machine ,CNC Milling Machine,CNC Turning Maching,Vertical Machining Center ,Horizontal Machining Center,Lathe Machines,Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong.You are warmly welcomed to visit us.
Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA
Q5: What's the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment before shipment .
06: What's the MoQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
We want to know:
1.We strongly suggest you to tell us size, material of your workpiece for our evaluation if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
2.lf need ClF Price, please kindly tell us the port of destination.
Audited Supplier 
){kind=link}