| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted with a high-strength HT300 one-piece construction,the robust structure cast from durable iron ensures a solid bed foundation, featuring a 30-degree steptype flat rail structure. Utilizing finite element analysis, this design offers exceptional mechanical rigidity and stability, ensuring long-term reliable precision, processing consistency, and extended tool life. Stress relief treatments furtherenhanceaccuracy and stability. The high-strength roller rail design, coupled with a screw pre-tension drive system, enhances response rigidity.
Both ends of the workpiece can be expertly machined simultaneously in a single clamping, significantly streamlining manual operations, boosting production, and minimizing procedural steps. The second spindle is fully capable of comprehensive turning, facilitating workpiece handling during machining and reducing cycle times.
1.Direct drive synchronous electric spindle device: The magnetic ringtypeincremental encoder (sine and cosine) offers positioning accuracy of 20 arc seconds, while the C-axis indexing accuracy stands at 40 arc seconds.
This effectively eliminates spindle vibration,ensuring spindlenose deflection accuracy within 0.002mm.This improvement enhances the surface finish of workpieces.
The rear-mounted rotor design facilitates easier installation and maintenance.
Equipped with a cooling system, the spindle motor maintains a constant working temperature by mitigating thermal displacement. After passing rigorous dynamic balance tests, the spindle system boasts excellent precision retention, high rigidity, and efficiency, enabling users to perform both finishing and rough machining, including heavy cutting. This feature is particularly advantageous for mass production of complex shapes and high-finish products.products.
2. High-rigidity integral servo power turret: This turret ensures rapid and precise tool changes, utilizing a high-rigidity BMT interface for tool holder installation, driven by a servo spindle motor for power transmission.
3. The machine is equipped with THK linear guide rails and ball screws. These heat-treated and precision-ground ball screws guarantee optimal precision and durability. Each axis features a direct transfer shaft structure and a double-anchor pre-relay method to minimize thermal displacement and significantly enhance machining accuracy. The high-rigidity, large-size, heavy-duty linear slide rails ensure the machine's precision remains unaffected by impacts, offering smooth displacement and low noise, thereby extending the machine's service life.
4. The standard configuration includes a FANUC system, and the feed drive is powered by a FANUC servo motor.
5. The hydraulic and lubrication systems are impeccably designed with high-quality hydraulic pumps, valves, and other components, drastically reducing failure rates. The system's design emphasizes simplicity and reliability.
6. Incorporating a Taiwan rotary chuck, oil cylinder, and an automatic chip removal device, the machine significantly reduces operator labor intensity, ensuring safe and efficient production. These functional components are programmable for seamless control. Special fixtures.
| Item | Unit | 1200MS |
| The largest diameter rotating bed | mm | Φ700 |
| Max.processing diameter | mm | Φ520 |
| Max.Swing Over Cross Slide | mm | Ф350 |
| Max.processing length | mm | 1020 |
| Spindle nose | / | A2-8 |
| Max.speed of spindle | rpm | 2200 |
| Hydraulic Cylinder/Chuck | / | 10" |
| Spindle hole diame | mm | Ф86 |
| Bar diameter | mm | Ф76 |
| Spindle motor power | Kw | 17/25 |
| Spindle motor power | Nm | 180-400 |
| Spindle nose | / | A2-6 |
| Max.speed of spindle | rpm | 4300 |
| Hydraulic Cylinder/Chuck | / | 8" |
| Spindle hole diameter | mm | Ф66 |
| Bar diameter | mm | Ф52 |
| Spindle motor power | Kw | 18/22 |
| Spindle motor power | Nm | 91-227 |
| X/Z/S motor power | kw | 3.0/3.0/3.0 |
| X/Z travel | mm | 310/1130 |
| S travel | mm | 870 |
| X/Z/S axis moving fast | m/min | 24/24/24 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| X/Z/S axis rail specification | spes | 45/45/35 roller |
| X/Z/S shaft wire specifications | mm | 4012 |
| Power knife tower type | pcs | BMT65-12T |
| Power cutter tower motor | Kw/Nm | 7.5/47.8 |
| Max.speed of | rpm | 6000 |
| The knife biock specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф50 |
| The adjacent tool change time | sec | 0.2 |
| positioning accuracy | / | ±2" |
| Repeat positioning accuracy | / | ±1" |
| Machine size | mm | 3900*2110*2100 |
| Machine Weight | kg | 7700 |
| Cutting fluid tank volume | L | 300 |
| Cooling water pump power | W | 750 |
| Volume of hydraulic unit box | L | 45 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
Q1: How can I choose the most suitable machines?
Please provide your specifications so we can recommend the optimal model for you. Alternatively, you can select the exact model yourself or send us the product drawings, and we will identify the most suitable machines for your needs.
Q2: What are the main products of your company?
We specialize in a diverse range of machinery including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, and comprehensive Turning and Milling composite processing machinery.
Q3: Where are your factories located? How can I visit?
Our five factories are strategically located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us at any of these locations.
Q4. How do you transport the machinery?
We provide tailored transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are the Payment Terms?
Payment terms are T/T: 30% initial payment upon order, with the remaining 70% balance due before shipment.
Q6: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is 1 set for most machines. However, for some lower-cost machines, the MOQ may be higher than 1 set.
We want to know:
1. To better recommend a suitable model, please provide the size and material of your workpiece, and if possible, send us the workpiece drawing for evaluation.
2. For CIF pricing, kindly inform us of your port of destination.
){kind=link}