| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted with high-strength HT300 one-piecestructurecastingironbed, the 30-degree steptypeflat rail structure employs finite element analysis for superior mechanical rigidity and stability. This design ensures long-term precision, stable processing, and extended tool life, with stress-relief treatment enhancing accuracy and stability.Improved accuracy and stability through a high-strength roller rail design. The drive system uses a screw pre-tension design to enhance response rigidity.
Our lathe allows both ends of the workpiece to be processed simultaneously in one clamping, simplifying manual operations, boosting output, and reducing processes. The second spindle enables full turning and uninterrupted machining, significantly cutting cycle times.
1.Direct drive synchronous electric spindle: magnetic ringtypeincremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminates spindlevibration, with nose end deflection accuracy within 0.002mm. Enhances workpiece surface finish.
A rear-mounted rotor facilitates installation and maintenance.
The spindle motor features a cooling system to mitigate thermal displacement, ensuring consistent spindle temperature. Rigorously dynamic balanced, the spindle system offers excellent precision retention, high rigidity, and efficiency, suitable for both finishing and heavy cutting, particularly for mass production of complex, high-finish products.products.
2. High rigidity integral servo power turret: offers rapid, precise tool changes. The tool holder uses a high-rigidity BMT interface, driven by a servo spindle motor for power transmission.
3. Equipped with THK linear guide rails and ball screws. The heat-treated and precision-ground ball screws ensure optimal precision and durability. Direct transfer shaft structure and double-anchor pre-relay minimize thermal displacement, enhancing machining accuracy. The high-rigidity, large-size, heavy-duty linear slide rails maintain machine accuracy under impact, allowing smooth, low-noise displacement, thus extending the service life.
4. Standard configuration with FANUC system, featuring a FANUC servo motor for feed drive.
5. A robust hydraulic and lubrication system with high-quality hydraulic pumps, valves, and components reduces the failure rate. Its simple and reliable design ensures efficiency.
6. Incorporates a Taiwan rotary chuck, oil cylinder, and automatic chip removal device to significantly reduce operator labor intensity, ensuring safe and efficient production. These functional components are programmable for precise control. Special fixture included.
| Name | Unit | SY150MS-II |
| The largest diameter rotating bed | mm | Ф380 |
| Max. processing diameter | mm | Ф100 |
| Max.Swing Over Cross Slide | mm | Ф160 |
| Max. processing length | mm | 150 |
| Spindle nose | / | A2-5 |
| Max. speed of spindle | rpm | 6000 |
| Hydraulic Cylinder/Chuck | / | 6" |
| Spindle hole diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Spindle motor power | kw | 11 |
| Spindle motor torque | Nm | 61-125 |
| Spindle nose | / | A2-4 |
| Max. speed of spindle | rpm | 6000 |
| Hydraulic Cylinder/Chuck | / | 5" |
| Spindle hole diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Spindle motor power | kw | 11 |
| Spindle motor power | Nm | 34-67 |
| X1/Z1 motor power | kw | 1.8/1.8 |
| X2/Z2 motor power | kw | 1.3/1.3 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| X/Z/S axis moving fast | mm/min | 30/30/30 |
| Slide rail type | mm | Roller 35/35 |
| Slide rail type | mm | Roller 30/30 |
| Turret type | pcs | BMT45-12T |
| Power motor | Kw | 4.0kw |
| Max. speed of | rpm | 5000 ER20 |
| The tool block specifications | mm | 20x20 |
| Circular cutter holder specification | mm | Ф32 |
| The adjacent tool change time | sec | 0.15 |
| Turret type | pcs | NC8T |
| Tool block specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф32 |
| The adjacent tool change time | sec | 0.15 |
| Machine size | m | 2.2x2.1x1.7 |
| Machine Weight | kg | 3500 |
| Cutting fluid tank volume | L | 150 |
| Volume of hydraulic unit box | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
Please share your specifications with us. We can either recommend the best model for your needs or you can choose a specific model yourself. Alternatively, send us your product drawings and we will select the most suitable machines for you.
Q2: What are the main products of your company?
We specialize in a wide range of machinery including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and equipment for turning and milling composite processing.
Q3: Where is your factory located? How can I visit?
Our factories are strategically located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us.
Q4: How do you handle transportation?
We provide comprehensive transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
T/T, with a 30% initial payment upon order and the remaining 70% balance payment before shipment.
Q6: What is the MOQ (Minimum Order Quantity)?
A: The MOQ is 1 set. Note that some low-cost machines may require a higher quantity.
We want to know:
1. We strongly suggest you provide the size and material of your workpiece for our evaluation. If possible, it's better to send us a workpiece drawing so that we can recommend the most suitable model for you.
2. If you need a CIF price, please kindly specify the port of destination.
){kind=link}