Advanced CNC Turning and Milling Center CNC Turret Lathe with 12 Tools

• After-sales Service: Support
• Warranty: One Year
• Type: Turret Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Inclined Guide Rail
• Tool Holder: Single-tool Holder CNC Lathe
• Model NO.: SY3000MH
• Power Source: Electric
• Controlling Mode: CNC
• Automatic Grade: Automatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: GS, CE, ISO 9001
• Condition: New
• Control System: Fanuc, Siemens, Mitsubishi
• Spindle: A2-6,A2-8,A2-11
• Chuck: 6,8,10,12inch
• Tool Turret: Vdi or Bmt
• Motor Power: 11,15,18.5,22kw
• Transport Package: Plywood Case
• Specification: 9700*2350*2200
• Trademark: Oturn
• Origin: China
• HS Code: 8458110090
• Production Capacity: 1000/Year

Product Description

 

 

Product Description

 

The machine boasts an optimized 30-degree inclined bed structure, ensuring unparalleled precision, super rigidity, and exceptional cutting stability. Crafted from high-strength HT300 cast iron in a one-piece robust structure, it employs finite element analysis to deliver outstanding mechanical rigidity and stability. This guarantees long-term precision, enhances processing stability, and extends tool life. Stress relief treatment further enhances precision stability, while the high-strength hard rail structure and screw pre-tensioning transmission system significantly boost rigidity performance.

Main features of this machine tool:

1. The spindle unit features an independent sleeve design and has undergone rigorous dynamic balance tests. It delivers high precision, excellent precision retention, minimal thermal deformation, and superb thermal stability. With a maximum speed of 2500rpm and nose deflection accuracy within 0.003MM, the spindle system utilizes a large-diameter high-precision double-row roller bearing with an oblique contact ball bearing structure. The optimally spaced two-point balanced support design accommodates both radial and axial loads, enabling high-speed precision cutting and low-speed heavy cutting. This makes it ideal for mass production of complex, high-precision, and high-finish products.

2. The high rigidity servo power turret enhances rapid and precise tool change performance. Coupled with high-speed power shaft milling, it achieves exceptional turning and milling capabilities. The tool holder features a high-rigidity BMT installation interface, driven by a servo spindle motor for superior power transmission.

3. Equipped with hard rail guide rails and precision-ground, heat-treated ball screws, the machine ensures optimal precision and durability. Each axis employs a direct transfer axis structure and double anchor pre-relay method, minimizing thermal displacement and significantly improving machining accuracy.

The machine's precision and durability are further enhanced by its direct transfer axis structure and double anchor pre-relay method for each axis. This design minimizes thermal displacement and greatly improves machining accuracy.

4. Users benefit from a complete hydraulic and lubrication system, featuring high-quality hydraulic pumps and valves that significantly reduce failure rates. The system's design is straightforward and reliable, utilizing centralized quantitative automatic lubrication for seamless operation.

5. The hydraulic tailstock features a high-rigidity integral structure to eliminate vibration and provide exceptional stability. The sleeve's expansion and contraction are hydraulically controlled, ensuring convenience, speed, and reliability.

6. Incorporating a Taiwan rotary chuck oil cylinder and an automatic chip removal device, this machine significantly reduces operator labor intensity while ensuring safe, efficient production. These functional components can be easily controlled via programming, enhancing operational efficiency with specialized fixtures.

Product Parameters

 

Name	Unit	SY3000MH
Max. swing diameter over bed	mm	Φ640
Max. processing diameter	mm	Φ460
Max. swing diameter over cross slide	mm	Ф350
Max. processing length	mm	3250
Spindle nose	/	A2-15
Chuck	"	15
Spindle bore diameter	mm	Ф132
Bar diameter	mm	Ф117
Max. Spindle speed	rpm	1500
Spindle motor power	kw	26KW
Motor torque 248 pulley ratio; 1:2	Nm	496/706
X/Z travel	mm	280/3310
X/Z Specification of shaft guide		Box way
X/Z Shaft motor torque	Nm	18.6
X/Z motor power	KW	2.9/2.9
X/Z axis moving fast	m/min	18/18
Positioning accuracy	mm	±0.005
Repeatability	mm	±0.003
Power turret	/	BMT65-12T/ER32
Power turret motor	Kw	5.0/7.5
Max speed of power turret	Rpm	5000
The specification of outer diameter tool holder	mm	25x25
The specification of inner diameter tool holder	mm	Ф50
The adjacent tool change time	sec	0.2
Programmable hydraulic tail seat		Hydraulic
The biggest stroke of the tail	mm	3180
Morse Slideway	type	Morse5#
Sleeve diameter	mm	Ф100
Sleeve travel	mm	80
Machine size	m	9700*2350*2200
Machine Weight	kg	12500
Cutting fluid tank volume	L	250
Cutting water pump	kw	0.75
Hydraulic unit box volume	L	40
Hydraulic oil pump motor power	kw	1.5
Lubricant tank volume	L	2
Automatic lubrication pump motor power	W	50
Cooling water pump power	W	750

 

Products Configurations

Company Profile

 

Quality Control

Our Advantages

FAQ

 

Q1: How can I choose the most suitable machines?
Please provide your specifications, and we will recommend the optimal model for you. Alternatively, you can select the exact model yourself or send us the product drawings, and we will ensure you receive the most suitable machines.

Q2: What are the main products of your company?
We specialize in a diverse range of machines, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and composite processing solutions combining turning and milling.

Q3: Where is your factory located? How can I visit?
We operate five factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. You are warmly welcomed to visit any of our locations.

Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA.

Q5: What are the payment terms?
Our terms are T/T with a 30% initial payment upon order and the remaining 70% balance before shipment.

Q6: What is your Minimum Order Quantity (MOQ)?
A: Our MOQ is 1 set, although some lower-cost machines may require a higher quantity.

We would like to know:
1. We strongly suggest providing the size and material details of your workpiece for our evaluation. If possible, send us the workpiece drawing so we can recommend the most suitable model.
2. If you need a CIF price, please kindly specify the port of destination.