| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted from high-strength HT300 one-piecestructurecastingironbed, this 30-degree steptypeflat rail structure utilizes advanced finite element analysis for superior mechanical rigidity and stability. It maintains long-term precise accuracy, processing stability, and extended tool life, enhanced by stress relief treatment.toimprove precision and stability. The high-strength roller rail design, combined with a screw pre-tension drive system, ensures heightened response rigidity.
Simultaneous end processing in one clamping vastly simplifies manual operations, boosts output, and reduces procedural steps. The second spindle allows full turning, optimizing workpiece expression during machining, hence cutting cycle times.
1.Direct drive synchronous electric spindle device: magnetic ringtypeincremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminating spindlevibrations, the nose end deflection accuracy remains within 0.002mm. This significantly enhances the workpiece's surface finish.
A rear-mounted rotor facilitates easier installation and maintenance.
The spindle motor, equipped with a cooling system, mitigates thermal displacement effects, ensuring a consistent working temperature. The spindle system, rigorously tested for dynamic balance, offers excellent precision retention, high rigidity, and efficiency. This versatility enables both precision finishing and heavy-duty rough machining, ideal for mass production of intricate, high-finish products.products.
2. The high rigidity integral servo power turret ensures rapid and precise tool changes. It features a high-rigidity BMT interface and a servo spindle motor-driven power transmission shaft for optimal performance.
3. Equipped with THK linear guide rails and ball screws, the machine provides exceptional precision and durability. Each axis utilizes a direct transfer shaft structure and a double-anchor pre-relay method to minimize thermal displacement, significantly enhancing machining accuracy. The high-rigidity, large-size, heavy-duty linear slide rails maintain machine accuracy under impact, ensure smooth displacement, and reduce noise, prolonging machine life.
4. Comes standard with the FANUC system, featuring a FANUC servo motor-driven feed drive.
5. Featuring a superior hydraulic and lubrication system with top-quality hydraulic pumps and valves, this design significantly lowers failure rates. Its simple and reliable system ensures minimal maintenance.
6. Integrates a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, reducing operator labor intensity and facilitating safe, efficient production. All functional components are programmable, including special fixtures.
| Item | Unit | 1200MS |
| The largest diameter rotating bed | mm | Φ700 |
| Max.processing diameter | mm | Φ520 |
| Max.Swing Over Cross Slide | mm | Ф350 |
| Max.processing length | mm | 1020 |
| Spindle nose | / | A2-8 |
| Max.speed of spindle | rpm | 2200 |
| Hydraulic Cylinder/Chuck | / | 10" |
| Spindle hole diame | mm | Ф86 |
| Bar diameter | mm | Ф76 |
| Spindle motor power | Kw | 17/25 |
| Spindle motor power | Nm | 180-400 |
| Spindle nose | / | A2-6 |
| Max.speed of spindle | rpm | 4300 |
| Hydraulic Cylinder/Chuck | / | 8" |
| Spindle hole diameter | mm | Ф66 |
| Bar diameter | mm | Ф52 |
| Spindle motor power | Kw | 18/22 |
| Spindle motor power | Nm | 91-227 |
| X/Z/S motor power | kw | 3.0/3.0/3.0 |
| X/Z travel | mm | 310/1130 |
| S travel | mm | 870 |
| X/Z/S axis moving fast | m/min | 24/24/24 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| X/Z/S axis rail specification | spes | 45/45/35 roller |
| X/Z/S shaft wire specifications | mm | 4012 |
| Power knife tower type | pcs | BMT65-12T |
| Power cutter tower motor | Kw/Nm | 7.5/47.8 |
| Max.speed of | rpm | 6000 |
| The knife biock specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф50 |
| The adjacent tool change time | sec | 0.2 |
| positioning accuracy | / | ±2" |
| Repeat positioning accuracy | / | ±1" |
| Machine size | mm | 3900*2110*2100 |
| Machine Weight | kg | 7700 |
| Cutting fluid tank volume | L | 300 |
| Cooling water pump power | W | 750 |
| Volume of hydraulic unit box | L | 45 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
){kind=link}