The machine adopts an optimized 30-degree inclined bed structure design, and has high precision, super rigidity and excellent cutting stability. High-strength HT300 cast iron one-piece strong structure bed, the application of finite element analysis, the overall mechanical rigidity and stability are excellent, and can maintain long-term reliable precision, improve processing stability and tool life, stress relief treatment improves precision stability, High-strength hard rail structure, the transmission system adopts screw pre-tensioning design to improve the performance of reflecting rigidity.
Main features of this machine tool:
1. The spindle unit is an independent sleeve type. The spindle system has passed strict dynamic balance tests, with high precision, good precision retention, small thermal deformation, and good thermal stability. The maximum speed can reach 2500rpm, and the nose deflection accuracy is within 0.003MM. The front end of the shaft uses a large-diameter high-precision double-row roller bearing with a combined oblique contact ball bearing structure. The optimal span two-point balanced support design can withstand radial and axial loads, and can also be used for high-speed precision for users. Cutting can also be used for low-speed heavy cutting, especially suitable for mass production of products with complex shapes, high precision requirements, and high finish.
2. High rigidity servo power turret. It is helpful for the rapid and precise tool change performance of the servo turret, coupled with the power milling of the high-speed power shaft, to achieve the excellent processing capability of turning and milling. The tool holder is installed with a high-rigidity BMT installation interface. The power transmission shaft is driven by a servo spindle motor.
3. The machine tool is equipped with hard rail guide rails and ball screws, and the heat-treated and precision-ground ball screws can ensure the best
Excellent precision and durability, each axis adopts direct transfer axis structure and double anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy.
4. This machine provides users with a complete hydraulic and lubrication system, using high-quality hydraulic pumps and hydraulic valves and other components, which greatly reduces the failure rate. The design of the hydraulic and lubrication system is simple and reliable. The machine tool adopts centralized quantitative automatic lubrication.
5. The hydraulic tailstock has a high rigid structure integral tailstock, which can eliminate vibration and provide excellent stability. The expansion and contraction of the sleeve is realized by the hydraulic cylinder, which is convenient, fast and reliable.
6. The Taiwan rotary chuck oil cylinder is adopted, and the automatic chip removal device is selected at the same time, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. Special fixture.
| Name |
Unit |
SY2000MYH/E |
| Max. swing diameter over bed |
mm |
Φ800 |
| Max. processing diameter |
mm |
Φ520 |
| Max. swing diameter over cross slide |
mm |
Ф500 |
| Max. processing length |
mm |
1940 |
| Spindle nose |
/ |
A2-11 |
| Chuck |
” |
12 |
| Spindle bore diameter |
mm |
Ф102 |
| Bar diameter |
mm |
Ф88 |
| Max. spindle speed |
rpm |
2000 |
| Spindle motor power |
kw |
26KW |
| Motor torque 248 pulley ratio; 1:2 |
Nm |
496/706 |
| X/Z/Y travel |
mm |
310/2000/120±60 |
| X/Z Specification of shaft guide |
|
Box way |
| X/Z Shaft motor torque |
Nm |
18.6 |
| X/Z/Y motor power |
KW |
2.9/2.9/1.8 |
| X/Z/Y axis moving fast |
m/min |
18/18/8 |
| Positioning accuracy |
mm |
±0.005 |
| Repeatability |
mm |
±0.003 |
| Power turret |
/ |
BMT65-12T |
| Power turret motor |
Kw |
5.0/7.5 |
| Max. speed of power tool holder |
rpm |
5000 |
| The specification of outer diameter tool holder |
mm |
25x25 |
| The specification of inner diameter tool holder |
mm |
Ф50 |
| The adjacent tool change time |
sec |
0.2 |
| Programmable hydraulic tail seat |
|
Hydraulic |
| The biggest stroke of the tail |
mm |
2130 |
| Morse Slideway |
type |
Mosh5# |
| Sleeve diameter |
mm |
Ф100 |
| Sleeve travel |
mm |
80 |
| Machine size |
m |
5450*2210*2100 |
| Machine Weight |
kg |
8000 |
| Cutting fluid tank volume |
L |
250 |
| Cutting water pump |
kw |
0.75 |
| Hydraulic unit box volume |
L |
40 |
| Hydraulic oil pump motor power |
kw |
1.5 |
| Lubricant tank volume |
L |
2 |
| Automatic lubrication pump motor power |
W |
50 |
Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best model for you,or you can choose the exact model,you can also send us the products drawing,we will choose the most suitable machines for you .
Q2: What's your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe Machine ,CNC Milling Machine,CNC Turning Maching,Vertical Machining Center ,Horizontal Machining Center,Lathe Machines,Turning and milling composite processing so on.
Q3: Where is our factory located? How can l visit there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong.You are warmly welcomed to visit us.
Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA
Q5: What's the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment before shipment .
06: What's the MoQ?
A: 1 set .(Only some low cost machines will be more than 1 set )
We want to know:
1.We strongly suggest you to tell us size, material of your workpiece for our evaluation if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
2.lf need ClF Price, please kindly tell us the port of destination.
Audited Supplier 
){kind=link}