| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed at the same time in one clamping, which greatly simplifies the manual operation, increases the output and reduces the process. The second spindle is capable of full turning and can express workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminate the vibration of spindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.
The rear-mounted rotor is used to facilitate installation and maintenance.
The spindle motor is equipped with cooling system to suppress the influence of thermal displacement and ensure a constant working temperature of the spindle. The spindle system has passed the strict dynamic balance test. It has good precision retention, high rigidity and high efficiency, so that the machine can not only complete finishing machining, but also rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high finishproduct.
2.High rigidity integral servo power turret. With rapid and precise tool change performance. The tool holder installation used high-rigidity BMT interface, and the power transmission shaft is driven by servo spindle motor.
3.The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw can ensure the best precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy. High rigidity, large size, and heavy-duty linear slide rails can keep the accuracy of the machine unaffected when it is impacted, the displacement is smooth and the noise is low, which can prolong the service life.
4.Standard configuration FANUC system, and the feed drive adopts FANUC servo motor.
5.Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.
6.Using Taiwan rotary chuck, oil cylinder and automatic chip removal device, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. Special fixture.
| Name | Unit | TY200MS |
| The largest diameter rotating bed | mm | Ф660 |
| Max. processing diameter | mm | Ф320 |
| Max.Swing Over Cross Slide | mm | Ф300 |
| Max. processing length | mm | 400 |
| Bar diameter | mm | Ф46/46 |
| Spindle nose | / | A2-5 |
| Spindle hole diameter | mm | Ф56 |
| Max. speed of spindle | rpm | 5500 |
| Spindle motor power | kw | 17.5 |
| Spindle motor power | Nm | 62-125 |
| Fydraulic Cylinder/Chuck | / | 6" |
| Spindle nose | / | A2-5 |
| Spindle hole diame | mm | Ф56 |
| Max. speed of spindle | rpm | 5500 |
| Spindle motor power | kw | 17.5 |
| Spindle motor power | Nm | 62-125 |
| Hydraulic Cylinder/Chuck | / | 6" |
| X/Z/S motor power | kw | 2.5/2.5/1.2 |
| X/Z travel | mm | 210/490 |
| S travel | mm | 440 |
| X/Z/S axis moving fast | mm/min | 24/24/24 |
| Slide rail type | mm | 35roller |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| The knife tower type | / | BMT55-12T |
| Power cutter tower motor | Kw/Nm | 4.5/11-27 |
| Max. speed of | rpm | 6000 |
| The knife biock specifications | mm | 25*25 |
| Circular cutter holder specification | mm | Ф40 |
| The adjacent tool change time | sec | 0.2 |
| Machine size | mm | 2600*2100*1900 |
| Machine Weight | kg | 4200 |
| Cutting fluid tank volume | L | 150 |
| Volume of hydraulic unit box | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
To help you select the optimal machine, please share your specifications with us. We can recommend the best model tailored to your needs. Alternatively, if you have a specific model in mind, you can opt for that. For precise recommendations, you can send us the product drawings, and we will ensure the most suitable machines are chosen for you.
Q2: What are the main products of your company?
Our expertise lies in a wide range of machines, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and Turning and Milling Composite Processing Machines, among others.
Q3: Where is our factory located? How can I visit there?
Our operations span across five factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly invite you to visit us at any of these locations.
Q4. How do you transport the machines?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA options to ensure safe and timely delivery.
Q5: What are the Payment Terms?
Our payment terms are T/T, with a 30% initial payment required upon order and the remaining 70% balance due before shipment.
Q6: What is the MoQ?
A: The Minimum Order Quantity is 1 set. Some lower-cost machines may require a higher quantity.
We would like to know:
1. For an accurate evaluation, we strongly recommend that you provide us with the size and material details of your workpiece. If possible, sending us the workpiece drawing will help us suggest the most suitable model for your needs.
2. If you require a CIF Price, please kindly inform us of the port of destination.
){kind=link}