| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted from high-strength HT300 one-piecestructurecastingironbed, the 30-degree steptypeflat rail structure benefits from finite element analysis, ensuring excellent mechanical rigidity and stability. This design maintains long-term accuracy, processing stability, and tool life. Stress relief treatment enhancesimproves accuracy and stability. The high-strength roller rail design and screw pre-tension drive system enhance response rigidity.
Simultaneous processing of both ends of the workpiece in one clamping simplifies manual operation, boosts output, and streamlines processes. The second spindle enables full turning and efficient workpiece handling, reducing cycle times.
1.Direct drive synchronous electric spindle device features a magnetic ringtypeincremental encoder (Sine and cosine) with positioning accuracy of 20 arc seconds and C-axis indexing accuracy of 40 arc seconds.
Effectively eliminates spindlevibration, with nose end deflection accuracy within 0.002mm. Enhances the surface finish of the workpiece.
The rear-mounted rotor simplifies installation and maintenance.
The spindle motor, equipped with a cooling system, controls thermal displacement, ensuring constant spindle temperature. Having passed rigorous dynamic balance tests, the spindle system promises precision retention, high rigidity, and efficiency. It excels in both finishing and heavy cutting, ideal for mass production of complex shapes with high finishes.products.
2. High rigidity integral servo power turret delivers rapid and precise tool changes. The tool holder features a high-rigidity BMT interface, driven by a servo spindle motor.
3. Equipped with THK linear guide rails and precision-ground ball screws, the machine ensures optimal precision and durability. Each axis uses a direct transfer shaft and double-anchor pre-relay method, minimizing thermal displacement and significantly enhancing accuracy. The high rigidity, large size, and heavy-duty linear slide rails maintain machine accuracy even under impact, ensuring smooth displacement and low noise, thus extending service life.
4. Standard configuration includes the FANUC system with FANUC servo motor for feed drive.
5. The hydraulic and lubrication system features high-quality hydraulic pumps, valves, and components, reducing failure rates. The system design is simple and reliable.
6. Incorporates a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, reducing operator labor intensity and enabling safe, efficient production. These functions are programmable, with special fixture options.
| Item | Unit | 1200MS |
| The largest diameter rotating bed | mm | Φ700 |
| Max.processing diameter | mm | Φ520 |
| Max.Swing Over Cross Slide | mm | Ф350 |
| Max.processing length | mm | 1020 |
| Spindle nose | / | A2-8 |
| Max.speed of spindle | rpm | 2200 |
| Hydraulic Cylinder/Chuck | / | 10" |
| Spindle hole diame | mm | Ф86 |
| Bar diameter | mm | Ф76 |
| Spindle motor power | Kw | 17/25 |
| Spindle motor power | Nm | 180-400 |
| Spindle nose | / | A2-6 |
| Max.speed of spindle | rpm | 4300 |
| Hydraulic Cylinder/Chuck | / | 8" |
| Spindle hole diameter | mm | Ф66 |
| Bar diameter | mm | Ф52 |
| Spindle motor power | Kw | 18/22 |
| Spindle motor power | Nm | 91-227 |
| X/Z/S motor power | kw | 3.0/3.0/3.0 |
| X/Z travel | mm | 310/1130 |
| S travel | mm | 870 |
| X/Z/S axis moving fast | m/min | 24/24/24 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| X/Z/S axis rail specification | spes | 45/45/35 roller |
| X/Z/S shaft wire specifications | mm | 4012 |
| Power knife tower type | pcs | BMT65-12T |
| Power cutter tower motor | Kw/Nm | 7.5/47.8 |
| Max.speed of | rpm | 6000 |
| The knife biock specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф50 |
| The adjacent tool change time | sec | 0.2 |
| positioning accuracy | / | ±2" |
| Repeat positioning accuracy | / | ±1" |
| Machine size | mm | 3900*2110*2100 |
| Machine Weight | kg | 7700 |
| Cutting fluid tank volume | L | 300 |
| Cooling water pump power | W | 750 |
| Volume of hydraulic unit box | L | 45 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
){kind=link}