| After-sales Service: | Support |
|---|---|
| Warranty: | One Year |
| Type: | Turret Lathe |
| Processing Accessory: | Chuck CNC Lathe |
| Guide Rail: | Inclined Guide Rail |
| Tool Holder: | Double-tool Holder CNC Lathe |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed at the same time in one clamping, which greatly simplifies the manual operation, increases the output and reduces the process. The second spindle is capable of full turning and can express workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminate the vibration of spindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.
The rear-mounted rotor is used to facilitate installation and maintenance.
The spindle motor is equipped with cooling system to suppress the influence of thermal displacement and ensure a constant working temperature of the spindle. The spindle system has passed the strict dynamic balance test. It has good precision retention, high rigidity and high efficiency, so that the machine can not only complete finishing machining, but also rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high finishproduct.
2. High rigidity integral servo power turret. With rapid and precise tool change performance. The tool holder installation used high-rigidity BMT interface, and the power transmission shaft is driven by servo spindle motor.
3. The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw can ensure the best precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy. High rigidity, large size, and heavy-duty linear slide rails can keep the accuracy of the machine unaffected when it is impacted, the displacement is smooth and the noise is low, which can prolong the service life.
4. Standard configuration FANUC system, and the feed drive adopts FANUC servo motor.
5. Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.
6. Using Taiwan rotary chuck, oil cylinder and automatic chip removal device, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. Special fixture.
| Name | Unit |
SY1600MS |
| The largest diameter rotating bed | mm | Φ700 |
| Max. processing diameter | mm | Φ520 |
| Max.Swing Over Cross Slide | mm | Φ350 |
| Max. processing length | mm | 1420 |
| Spindle nose | / | A2-8 |
| Max. speed of spindle | rpm | 2200 |
| Hydraulic Cylinder/Chuck | / | 10″ |
| Spindle hole diame | mm | Φ86 |
| Bar diameter | mm | Φ76 |
| Spindle motor power | kw | 24 |
| Spindle motor power | Nm | 160-390 |
| Spindle nose | / | A2-6 |
| Max. speed of spindle | rpm | 4300 |
| Hydraulic Cylinder/Chuck | / | 8" |
| Spindle hole diame | mm | Ф66 |
| Bar diameter | mm | Φ52 |
| Spindle motor power | kw | 18/22 |
| Spindle motor power | Nm | 105-227 |
| X/Z/S motor power | kw | 310/1530/1280 |
| X/Z travel | mm | 45/45/35roller |
| S travel | mm | 4012 |
| X/Z/S axis moving fast | mm/min | 2.9 |
| positioning accuracy | mm | ±0.005 |
| repeat positioning accuracy | mm | ±0.003 |
| X/Z/S slide rail type | mm | 24/24 |
| Power knife tower type | pcs | BMT65-12T |
| Power cutter tower motor | Kw/Nm | 5.0/47.7 |
| Max. speed of | rpm | 5000 |
| The tool biock specifications | mm | 25X25 |
| Circular cutter holder specification | mm | Φ50 |
| The adjacent tool change time | sec | 0.2 |
| Positioning accuracy | / | ±2" |
| Repeat positioning accuracy | / | ±1" |
| Machine size | mm | 4300x2110x2100 |
| Machine Weight | kg | 8400 |
| Cutting fluid tank volume | L | 300 |
| Cooling water pump power | W | 750 |
| Volume of hydraulic unit box | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}