| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Crafted with high-strength HT300 one-piecestructure,castingiron,the bedfeatures a 30-degree steptypeflat rail structure. Application of finite element analysis ensures superb overall mechanical rigidity and stability, maintaining long-term reliable accuracy, processing stability, and extended tool life. Stress-relief treatment is applied toimprove accuracy and stability. The high-strength roller rail design, coupled with a screw pre-tension drive system, enhances response rigidity.
Both ends of the workpiece can be processed simultaneously in one clamping, drastically simplifying manual operations, boosting output, and reducing procedural steps. The second spindle is fully capable of comprehensive turning, allowing for expressed workpieces during machining, thereby reducing cycle times.
1.Direct drive synchronous electric spindle device: featuring a magnetic ringtypeincremental encoder (Sine and cosine) for positioning accuracy of 20 arc seconds and C-axis indexing accuracy of 40 arc seconds.
Effectively eliminates spindlevibration.The nose end deflection accuracy is within 0.002mm,enhancing the surface finish of the workpiece.
The rear-mounted rotor design facilitates installation and maintenance.
The spindle motor, equipped with a cooling system, suppresses thermal displacement, ensuring a constant working temperature. The spindle system, having passed strict dynamic balance tests, boasts excellent precision retention, high rigidity, and efficiency. This allows the machine to perform both finishing and rough machining, including heavy cutting, making it ideal for mass production of complex, high-finish products.products.
2. High rigidity integral servo power turret, enabling rapid and precise tool changes. The tool holder uses a high-rigidity BMT interface, and the power transmission shaft is driven by a servo spindle motor.
3. Equipped with THK linear guide rails and ball screws. The heat-treated and precision-ground ball screw ensures optimal precision and durability. Each axis features a direct transfer shaft structure and a double-anchor pre-relay method, minimizing thermal displacement and significantly enhancing machining accuracy. The machine's high-rigidity, large-size, and heavy-duty linear slide rails maintain accuracy even during impacts, ensuring smooth displacement and low noise, thus prolonging service life.
4. Standard configuration includes a FANUC system with feed drive powered by FANUC servo motors.
5. The hydraulic and lubrication systems are meticulously designed with high-quality hydraulic pumps, valves, and components, significantly reducing failure rates. The simple yet reliable design of these systems ensures optimal performance.
6. Featuring a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, the machine considerably reduces operator labor intensity while ensuring safe and efficient production. These functional components can be controlled via programming, incorporating special fixtures.
| Item | Unit | 150MS-III/E |
| Max.swing diameter over bed | mm | Ф380 |
| Max.processing diameter | mm | Ф100 |
| Max.processing diameter Over tool holder |
mm | Ф160 |
| Max.processing length | mm | 150 |
| Spindle nose | type | A2-5 |
| Max.speed of spindle | rpm | 5500 |
| Oil cylinder/Chuck | " | 6 |
| Spindle bore diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Direct drive spindle motor power | kw | 17.5 |
| Spindle torque | N.m | 62-125 |
| Sub spindle nose | type | A2-4 |
| Max.speed of Sub spindle | rpm | 6000 |
| Oil cylinder/collect | " | 5 |
| Sub spindle bore diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Direct drive sub spindle motor power | kw | 11 |
| Sub spindle torque | N.m | 27-66 |
| X1/Z1 motor power | kw | 1.8/1.2 |
| X2/Z2 motor power | kw | 1.2/1.2 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
| X1/Z1 slide rail type | / | Roller 35/35 |
| X2/Z2 slide rail type | / | Roller 30/30 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Upper power turret type | / | BMT45-12T |
| Upper power turret motor | Kw/N.m | 2.2/26 |
| Max.speed of upper power turret | rpm | 6000 ER20 |
| Specification of outer diameter tool holder | mm | 20x20 |
| Specification of inner diameter tool holder | mm | Ф32 |
| Adjacent tool change time | sec | 0.15 |
| Lower power turret type | / | BMT40-8T |
| Lower power turret motor | Kw/N.m | 2.2/26 |
| Max.speed of lower power turret | rpm | 6000 ER20 |
| Max.speed of lower power turret | mm | 20x20 |
| Specification of outer diameter tool holder | mm | Ф25 |
| Specification of inner diameter tool holder | sec | 0.15 |
| Machine dimension | m | 2.2x2.1x1.7 |
| Machine weight | kg | 3500 |
| Cutting fluid tank volume | L | 180 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricant oil tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
Please provide your specifications, and we will select the best model for you. Alternatively, you can choose the exact model yourself, or send us the product drawings, and we will recommend the most suitable machines for your needs.
Q2: What are the main products offered by your company?
Our company specializes in various types of machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and advanced Turning and Milling Composite Processing solutions.
Q3: Where is your factory located, and how can I visit?
We have five factories situated in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us.
Q4: How is the product transported?
We offer various transportation solutions, including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
Payment terms are T/T, with a 30% initial payment upon order and a 70% balance payment before shipment.
Q6: What is the MOQ?
A: The minimum order quantity is 1 set. (For some low-cost machines, the MOQ may be higher than 1 set.)
We want to know:
1. We strongly recommend that you provide the size and material of your workpiece for our evaluation. It would be even better if you could send us a drawing of the workpiece, so we can recommend the most suitable model for you!
2. If you require a CIF price, please kindly inform us of the destination port.
){kind=link}