Oturncnc 4 Axis Slant Bed Single Double Multi Spindle Lathe Fanuc Germany CNC Turning Center Ty200msy

• After-sales Service: Support
• Warranty: One Year
• Type: Turret Lathe
• Processing Accessory: Chuck CNC Lathe
• Guide Rail: Inclined Guide Rail
• Tool Holder: Double-tool Holder CNC Lathe
• Model NO.: TY200MSY
• Power Source: Electric
• Controlling Mode: CNC
• Automatic Grade: Automatic
• Setting Mode: Floor-type
• Precision: High Precision
• Certification: GS, CE, ISO 9001
• Condition: New
• Control System: Fanuc, Siemens, Mitsubishi
• Spindle: A2-6,A2-8,A2-11
• Chuck: 6,8,10,12inch
• Tool Turret: Vdi or Bmt
• Motor Power: 11,15,18.5,22kw
• Transport Package: Plywood Case
• Specification: 2600*2100*1900
• Trademark: Oturn
• Origin: China
• HS Code: 8458110090
• Production Capacity: 1000/Year

Product Description

Product Description

High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed at the same time in one clamping, which greatly simplifies the manual operation, increases the output and reduces the process. The second spindle is capable of full turning and can express workpieces during machining, reducing cycle time.

1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.

Effectively eliminate the vibration of spindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.

The rear-mounted rotor is used to facilitate installation and maintenance.

The spindle motor is equipped with cooling system to suppress the influence of thermal displacement and ensure a constant working temperature of the spindle. The spindle system has passed the strict dynamic balance test. It has good precision retention, high rigidity and high efficiency, so that the machine can not only complete finishing machining, but also rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high finish product.

2.High rigidity integral servo power turret. With rapid and precise tool change performance. The tool holder installation used high-rigidity BMT interface, and the power transmission shaft is driven by servo spindle motor.
3.Y-axis adopts 100MM stroke (±50 from the center line), capable of eccentric milling, drilling and tapping, equipped with a high-torque power turret and a servo-driven C-axis, capable of processing complex parts.

4.The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw can ensure the best precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy. High rigidity, large size, and heavy-duty linear slide rails can keep the accuracy of the machine unaffected when it is impacted, the displacement is smooth and the noise is low, which can prolong the service life.

5.Standard configuration FANUC system, and the feed drive adopts FANUC servo motor.

6.Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.

7.Using Taiwan rotary chuck, oil cylinder and automatic chip removal device, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. At the same time, various special fixtures can be designed and installed according to the special requirements of users.

Product Parameters

 

 

Name	Unit	TY200MSY
Max. diameter rotating bed	mm	Ф660
Max. processing diameter	mm	Ф370
Max. rotation of cross slide	mm	Ф300
Max. processing length	mm	380
Rod diameter	mm	Ф46/46
Spindle nose	/	A2-5
Spindle bore diameter	mm	Ф56
Spindle max. speed	rpm	5500
Spindle motor power	kw	17.5
Spindle motor power	Nm	62-125
Hydraulic cylinder/chuck	/	6"
Spindle nose	/	A2-5
Spindle bore diameter	mm	Ф56
Spindle max. speed	rpm	5500
Spindle motor power	Nm	62-125
Spindle motor power	kw	17.5
Hydraulic cylinder/chuck	/	6"
X/Z/Y/S motor power	kw	2.5/2.5/1.2/1.2
X/Z travel	mm	320/470
Y/S travel	mm	90(±45)/440
X/Z/Y/S axis rapid movement	mm/min	24/24/8/24
Slide type	mm	35 Roller
positioning accuracy	mm	±0.005
Repeatability	mm	±0.003
Turret type	/	BMT55-12T
Powered turret motor	Kw	4.5/11-27
The maximum speed is	rpm	6000
Knife block specifications	mm	25*25
Circular tool holder specifications	mm	Ф40
Adjacent tool change time	sec	0.2
Machine size	mm	2600*2100*1900
Machine weight	kg	4200
Cutting fluid tank volume	L	150
Hydraulic unit tank volume	L	40
Hydraulic oil pump motor power	kw	1.5
Lubricating oil tank volume	L	2
Automobile lubricating oil pump motor power	W	50
Cooling water pump power	W	750

 

Products Configurations

 

Company Profile

 

Quality Control

Our Advantages

FAQ

Q1:How can l choose the most suitable machines ?
Please tell me your specications,we can choose the best model for you,or you can choose the exact model,you can also send us the products drawing,we will choose the most suitable machines for you .

Q2: What's your main products of your company?
We specialized in all kinds of machines,such as CNC Lathe Machine ,CNC Milling Machine,CNC Turning Maching,Vertical Machining Center ,Horizontal Machining Center,Lathe Machines,Turning and milling composite processing so on.

Q3: Where is our factory located? How can l visit there?
We have 5 factories located in Guangzhou, Quzhou, Ningbo, and Guangdong.You are warmly welcomed to visit us.

Q4. How do you transport it?
Provide Transportation Solution DDP/CIF/FOB/FCA

Q5: What's the Payment Terms ?
T/T ,30% initial payment when order,70% balance payment before shipment .

06: What's the MoQ?
A: 1 set .(Only some low cost machines will be more than 1 set )

We want to know:
1.We strongly suggest you to tell us size, material of your workpiece for our evaluation if possible, better to send us workpiece drawing, so that we can recommend you most suitable model!
2.lf need ClF Price, please kindly tell us the port of destination.