| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-strength HT300 one-piecestructurecastingironbed, 30-degree steptypeflat rail structure, utilizing finite element analysis for exceptional mechanical rigidity and stability. Ensures long-term reliable accuracy, processing stability, and extended tool life. Stress relief treatmentimproves accuracy and stability. High-strength roller rail design with screw pre-tension drive system enhances response rigidity.
Both ends of the workpiece can be processed simultaneously in a single clamping, greatly simplifying manual operation, boosting output, and streamlining the process. The second spindle is fully capable of turning and expressing workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ringtypeincremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminates spindle vibrationaccuracy, with nose end deflection accuracy within 0.002mm. Enhances the surface finish of the workpiece.
Rear-mounted rotor for easy installation and maintenance.
Spindle motor features a cooling system to suppress thermal displacement, ensuring a constant spindle working temperature. The spindle system has passed rigorous dynamic balance tests, guaranteeing precision retention, high rigidity, and efficiency. Suitable for both finishing and heavy-duty rough machining, especially for mass production of complex, high-finish products.product.
2. High rigidity integral servo power turret with rapid, precise tool change performance. Features a high-rigidity BMT interface, with power transmission driven by a servo spindle motor.
3. Equipped with THK linear guide rail and ball screw. Heat-treated and precision-ground ball screw ensures optimal precision and durability. Each axis employs a direct transfer shaft structure and double-anchor pre-relay method, minimizing thermal displacement and enhancing machining accuracy. High rigidity, large-size, heavy-duty linear slide rails maintain machine accuracy under impact, ensure smooth displacement, and reduce noise, prolonging service life.
4. Standard configuration FANUC system, with feed drive using FANUC servo motor.
5. Features a robust hydraulic and lubrication system with high-quality hydraulic pumps, valves, and other components, significantly reducing failure rates. The system is designed for simplicity and reliability.
6. Utilizes a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, greatly reducing operator labor intensity while ensuring safe and efficient production. All functional components are programmable.
| Item | Unit | 1200MS |
| The largest diameter rotating bed | mm | Φ700 |
| Max.processing diameter | mm | Φ520 |
| Max.Swing Over Cross Slide | mm | Ф350 |
| Max.processing length | mm | 1020 |
| Spindle nose | / | A2-8 |
| Max.speed of spindle | rpm | 2200 |
| Hydraulic Cylinder/Chuck | / | 10" |
| Spindle hole diame | mm | Ф86 |
| Bar diameter | mm | Ф76 |
| Spindle motor power | Kw | 17/25 |
| Spindle motor power | Nm | 180-400 |
| Spindle nose | / | A2-6 |
| Max.speed of spindle | rpm | 4300 |
| Hydraulic Cylinder/Chuck | / | 8" |
| Spindle hole diameter | mm | Ф66 |
| Bar diameter | mm | Ф52 |
| Spindle motor power | Kw | 18/22 |
| Spindle motor power | Nm | 91-227 |
| X/Z/S motor power | kw | 3.0/3.0/3.0 |
| X/Z travel | mm | 310/1130 |
| S travel | mm | 870 |
| X/Z/S axis moving fast | m/min | 24/24/24 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| X/Z/S axis rail specification | spes | 45/45/35 roller |
| X/Z/S shaft wire specifications | mm | 4012 |
| Power knife tower type | pcs | BMT65-12T |
| Power cutter tower motor | Kw/Nm | 7.5/47.8 |
| Max.speed of | rpm | 6000 |
| The knife biock specifications | mm | 25x25 |
| Circular cutter holder specification | mm | Ф50 |
| The adjacent tool change time | sec | 0.2 |
| positioning accuracy | / | ±2" |
| Repeat positioning accuracy | / | ±1" |
| Machine size | mm | 3900*2110*2100 |
| Machine Weight | kg | 7700 |
| Cutting fluid tank volume | L | 300 |
| Cooling water pump power | W | 750 |
| Volume of hydraulic unit box | L | 45 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
Q1: How can I choose the most suitable machines?
To select the best model, please provide your specifications. We can assist in choosing the ideal machine, or you can specify the exact model you need. Alternatively, send us your product drawings, and we will recommend the most appropriate machines for your requirements.
Q2: What are the main products of your company?
Our company specializes in a diverse range of machinery, including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, and composite processing machines for turning and milling, among others.
Q3: Where is your factory located and how can I visit?
We have five factories situated in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit any of our locations.
Q4. How do you handle transportation?
We offer a range of transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
Our payment terms are T/T, with 30% initial payment upon order and 70% balance payment before shipment.
Q6: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is one set. For some low-cost machines, the MOQ may be higher.
We need to know:
1. It is highly recommended that you provide the size and material of your workpiece for our evaluation. If possible, sending us the workpiece drawing will enable us to suggest the most suitable model.
2. If you require a CIF price, please kindly inform us of the port of destination.
){kind=link}