| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-strength HT300 one-piecestructurecastingironbed, 30-degree steptypeflat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, maintaining long-term reliable accuracy, processing stability, and tool life. Stress relief treatmentimprove accuracy and stability, high-strength roller rail design, drive system with screw pre-tension design, enhancing response rigidity.
Both ends of the workpiece can be processed simultaneously in one clamping, greatly simplifying manual operation, increasing output, and reducing process steps. The second spindle supports full turning and can express workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ringtypeincremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminates spindlevibration, with nose end deflection accuracy within 0.002mm. Enhances the workpiece's surface finish.
The rear-mounted rotor facilitates installation and maintenance.
The spindle motor is equipped with a cooling system to suppress thermal displacement, ensuring a constant working temperature. The spindle system has undergone a strict dynamic balance test, ensuring good precision retention, high rigidity, and high efficiency. This enables the machine to perform both finishing and rough machining, as well as heavy cutting. Ideal for mass production of complex shapes and high finishproducts.
2. High rigidity integral servo power turret with rapid and precise tool change performance. The tool holder features a high-rigidity BMT interface, driven by a servo spindle motor.
3. Equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw ensures optimal precision and durability. Each axis employs a direct transfer shaft structure and a double-anchor pre-relay method to minimize thermal displacement, greatly improving machining accuracy. High rigidity, large size, and heavy-duty linear slide rails maintain machine accuracy during impacts, ensure smooth displacement, and reduce noise, prolonging service life.
4. Standard configuration with FANUC system and FANUC servo motor for the feed drive.
5. Perfect hydraulic and lubrication system with high-quality pumps, valves, and components, significantly reducing failure rates. The system design is simple and reliable.
6. Incorporates a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, greatly reducing operator labor intensity and ensuring safe and efficient production. All functional components can be programmed. Special fixture.
| Name | Unit | TY200MS |
| The largest diameter rotating bed | mm | Ф660 |
| Max. processing diameter | mm | Ф320 |
| Max.Swing Over Cross Slide | mm | Ф300 |
| Max. processing length | mm | 400 |
| Bar diameter | mm | Ф46/46 |
| Spindle nose | / | A2-5 |
| Spindle hole diameter | mm | Ф56 |
| Max. speed of spindle | rpm | 5500 |
| Spindle motor power | kw | 17.5 |
| Spindle motor power | Nm | 62-125 |
| Fydraulic Cylinder/Chuck | / | 6" |
| Spindle nose | / | A2-5 |
| Spindle hole diame | mm | Ф56 |
| Max. speed of spindle | rpm | 5500 |
| Spindle motor power | kw | 17.5 |
| Spindle motor power | Nm | 62-125 |
| Hydraulic Cylinder/Chuck | / | 6" |
| X/Z/S motor power | kw | 2.5/2.5/1.2 |
| X/Z travel | mm | 210/490 |
| S travel | mm | 440 |
| X/Z/S axis moving fast | mm/min | 24/24/24 |
| Slide rail type | mm | 35roller |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| The knife tower type | / | BMT55-12T |
| Power cutter tower motor | Kw/Nm | 4.5/11-27 |
| Max. speed of | rpm | 6000 |
| The knife biock specifications | mm | 25*25 |
| Circular cutter holder specification | mm | Ф40 |
| The adjacent tool change time | sec | 0.2 |
| Machine size | mm | 2600*2100*1900 |
| Machine Weight | kg | 4200 |
| Cutting fluid tank volume | L | 150 |
| Volume of hydraulic unit box | L | 40 |
| Hydraulic oil pump motor power | kw | 1.5 |
| Volume of lubricating oil tank | L | 2 |
| Auto lube pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
){kind=link}