| Customization: | Available |
|---|---|
| After-sales Service: | Support |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed simultaneously in one clamping, greatly simplifying manual operation, increasing output, and reducing processes. The second spindle is capable of full turning and can handle workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminate the vibration of spindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.
The rear-mounted rotor is used to facilitate installation and maintenance.
The spindle motor is equipped with a cooling system to suppress thermal displacement, ensuring a constant working temperature of the spindle. The spindle system has passed strict dynamic balance tests, offering excellent precision retention, high rigidity, and efficiency. This enables the machine to perform both finishing and rough machining, including heavy cutting, making it ideal for mass production of complex and highly finished products.product.
2. High rigidity integral servo power turret with rapid and precise tool change performance. The tool holder installation uses a high-rigidity BMT interface, and the power transmission shaft is driven by a servo spindle motor.
3. The machine is equipped with THK linear guide rails and ball screws. The heat-treated and precision-ground ball screw ensures optimal precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, minimizing thermal displacement and greatly enhancing machining accuracy. High rigidity, large size, and heavy-duty linear slide rails maintain machine accuracy during impacts, ensure smooth displacement, low noise, and prolong service life.
4. Standard configuration with FANUC system, utilizing FANUC servo motor for feed drive.
5. Perfect hydraulic and lubrication systems, featuring high-quality hydraulic pumps, valves, and components, significantly reducing failure rates. The hydraulic and lubrication system design is simple and reliable.
6. Incorporates a Taiwan rotary chuck, oil cylinder, and automatic chip removal device, dramatically reducing operator labor intensity while ensuring safe and efficient production. All functional components can be programmatically controlled. Special fixture.
| Item | Unit | 150MS-III/E |
| Max.swing diameter over bed | mm | Ф380 |
| Max.processing diameter | mm | Ф100 |
| Max.processing diameter Over tool holder |
mm | Ф160 |
| Max.processing length | mm | 150 |
| Spindle nose | type | A2-5 |
| Max.speed of spindle | rpm | 5500 |
| Oil cylinder/Chuck | " | 6 |
| Spindle bore diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Direct drive spindle motor power | kw | 17.5 |
| Spindle torque | N.m | 62-125 |
| Sub spindle nose | type | A2-4 |
| Max.speed of Sub spindle | rpm | 6000 |
| Oil cylinder/collect | " | 5 |
| Sub spindle bore diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Direct drive sub spindle motor power | kw | 11 |
| Sub spindle torque | N.m | 27-66 |
| X1/Z1 motor power | kw | 1.8/1.2 |
| X2/Z2 motor power | kw | 1.2/1.2 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
| X1/Z1 slide rail type | / | Roller 35/35 |
| X2/Z2 slide rail type | / | Roller 30/30 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Upper power turret type | / | BMT45-12T |
| Upper power turret motor | Kw/N.m | 2.2/26 |
| Max.speed of upper power turret | rpm | 6000 ER20 |
| Specification of outer diameter tool holder | mm | 20x20 |
| Specification of inner diameter tool holder | mm | Ф32 |
| Adjacent tool change time | sec | 0.15 |
| Lower power turret type | / | BMT40-8T |
| Lower power turret motor | Kw/N.m | 2.2/26 |
| Max.speed of lower power turret | rpm | 6000 ER20 |
| Max.speed of lower power turret | mm | 20x20 |
| Specification of outer diameter tool holder | mm | Ф25 |
| Specification of inner diameter tool holder | sec | 0.15 |
| Machine dimension | m | 2.2x2.1x1.7 |
| Machine weight | kg | 3500 |
| Cutting fluid tank volume | L | 180 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricant oil tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
Please provide us with your specifications, and we will select the ideal model for you. Alternatively, you may choose the exact model, or send us the product drawings, and we will recommend the most suitable machines tailored to your needs.
Q2: What are the main products of your company?
We specialize in a diverse range of machines including CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, Lathe Machines, as well as Turning and Milling Composite Processing machines.
Q3: Where is your factory located? How can I visit there?
We operate five factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly welcome you to visit us at any of these locations.
Q4: How do you handle transportation?
We offer comprehensive transportation solutions including DDP, CIF, FOB, and FCA.
Q5: What are the payment terms?
Our payment terms are T/T with a 30% initial payment upon order and 70% balance payment before shipment.
Q6: What is the Minimum Order Quantity (MOQ)?
A: The MOQ is 1 set. (Note: For some low-cost machines, the MOQ may be more than 1 set.)
We would like to know:
1. We strongly suggest you provide the size and material of your workpiece for our evaluation. Ideally, send us the workpiece drawing so that we can recommend the most suitable model for your requirements.
2. If you need a CIF price, please kindly provide the port of destination.
){kind=link}