| After-sales Service: | Support |
|---|---|
| Warranty: | One Year |
| Type: | Turret Lathe |
| Processing Accessory: | Chuck CNC Lathe |
| Guide Rail: | Inclined Guide Rail |
| Tool Holder: | Double-tool Holder CNC Lathe |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
High-strength HT300 one-piece structure casting iron bed, 30-degree step type flat rail structure, application of finite element analysis, excellent overall mechanical rigidity and stability, and can maintain long-term reliable accuracy, processing stability and tool life, stress relief treatment improve accuracy and stability, high-strength roller rail design, drive system adopts screw pre-tension design, improve response rigidity.
Both ends of the workpiece can be processed at the same time in one clamping, which greatly simplifies the manual operation, increases the output and reduces the process. The second spindle is capable of full turning and can express workpieces during machining, reducing cycle times.
1.Direct drive synchronous electric spindle device: magnetic ring type incremental encoder (Sine and cosine) positioning accuracy: 20 arc seconds, C-axis indexing accuracy: 40 arc seconds.
Effectively eliminate the vibration of spindle, and the deflection accuracy of the nose end is within 0.002mm. Improve the surface finish of the workpiece.
The rear-mounted rotor is used to facilitate installation and maintenance.
The spindle motor is equipped with cooling system to suppress the influence of thermal displacement and ensure a constant working temperature of the spindle. The spindle system has passed the strict dynamic balance test. It has good precision retention, high rigidity and high efficiency, so that the machine can not only complete finishing machining, but also rough machining and heavy cutting for users. It is especially suitable for mass production of complex shapes and high finishproduct.
2.High rigidity integral servo power turret. With rapid and precise tool change performance. The tool holder installation used high-rigidity BMT interface, and the power transmission shaft is driven by servo spindle motor.
3.The machine is equipped with THK linear guide rail and ball screw. The heat-treated and precision-ground ball screw can ensure the best precision and durability. Each axis adopts a direct transfer shaft structure and a double-anchor pre-relay method, which can minimize thermal displacement and greatly improve machining accuracy. High rigidity, large size, and heavy-duty linear slide rails can keep the accuracy of the machine unaffected when it is impacted, the displacement is smooth and the noise is low, which can prolong the service life.
4.Standard configuration FANUC system, and the feed drive adopts FANUC servo motor.
5.Perfect hydraulic and lubrication system, using high-quality hydraulic pumps, hydraulic valves and other components, greatly reducing the failure rate. The design of the hydraulic and lubrication system is simple and reliable.
6.Using Taiwan rotary chuck, oil cylinder and automatic chip removal device, which can greatly reduce the labor intensity of the operator and realize safe and efficient production. The above functional components can be controlled by programming. Special fixture.
| Item | Unit | 150MS-II/E |
| Max. swing diameter over bed | mm | Ф380 |
| Max. processing diameter | mm | Ф100 |
| Max. processing diameter Over tool holder |
mm | Ф160 |
| Max. processing length | mm | 150 |
| Spindle nose | type | A2-5 |
| Max. speed of spindle | rpm | 5500 |
| Oil cylinder/Chuck | " | 6 |
| Spindle bore diameter | mm | Ф56 |
| Bar diameter | mm | Ф45 |
| Direct drive spindle motor power | kw | 17.5 |
| Spindle torque | N.m | 62-125 |
| Sub spindle nose | type | A2-4 |
| Max. speed of Sub spindle | rpm | 6000 |
| Oil cylinder/collect | " | 5 |
| Sub spindle bore diameter | mm | Ф46 |
| Bar diameter | mm | Ф32 |
| Direct drive sub spindle motor power | kw | 11 |
| Sub spindle torque | N.m | 27-66 |
| X1/Z1 motor power | kw | 1.8/1.2 |
| X2/Z2 motor power | kw | 1.2/1.2 |
| X1/Z1 travel | mm | 135/370 |
| X2/Z2 travel | mm | 215/400 |
| X1/Z1/X2/Z2 fast moving | m/min | 30/30/30 |
| X1/Z1 slide rail type | / | Roller 35/35 |
| X2/Z2 slide rail type | / | Roller 30/30 |
| Positioning accuracy | mm | ±0.005 |
| Repeat positioning accuracy | mm | ±0.003 |
| Upper power turret type | / | BMT45-12T |
| Upper power turret motor | Kw/N.m | 2.2/26 |
| Max. speed of upper power turret | rpm | 6000 ER20 |
| Specification of outer diameter tool holder | mm | 20x20 |
| Specification of inner diameter tool holder | mm | Ф32 |
| Adjacent tool change time | sec | 0.15 |
| Lower turret type | / | NC8T |
| Max. speed of lower power turret | mm | 25x25 |
| Specification of outer diameter tool holder | mm | Ф32 |
| Specification of inner diameter tool holder | sec | 0.15 |
| Machine dimension | m | 2.2x2.1x1.7 |
| Machine weight | kg | 3200 |
| Cutting fluid tank volume | L | 180 |
| Hydraulic unit box volume | L | 40 |
| Hydraulic pump motor power | kw | 1.5 |
| Lubricant oil tank volume | L | 2 |
| Automatic lubrication pump motor power | W | 50 |
| Cooling water pump power | W | 750 |
Q1: How can I choose the most suitable machines?
To help you select the optimal model, please provide us with your specific requirements. We'll choose the best model for you, or you can specify the exact model you need. Additionally, sending us your product drawings will enable us to recommend the most suitable machines tailored for your needs.
Q2: What are the main products of your company?
We specialize in a wide array of high-precision machinery, including but not limited to CNC Lathe Machines, CNC Milling Machines, CNC Turning Machines, Vertical Machining Centers, Horizontal Machining Centers, and Turning & Milling Composite Processing machines. Our extensive range ensures we meet diverse manufacturing requirements with utmost precision.
Q3: Where is your factory located? How can I visit?
We proudly operate five state-of-the-art factories located in Guangzhou, Quzhou, Ningbo, and Guangdong. We warmly invite you to visit any of our facilities to witness our manufacturing excellence firsthand.
Q4: How do you transport the machines?
We offer comprehensive transportation solutions, including DDP, CIF, FOB, and FCA, ensuring your machines reach you safely and efficiently.
Q5: What are the payment terms?
Our payment terms include a 30% initial payment at the time of order and a 70% balance payment before shipment, via T/T.
Q6: What is the Minimum Order Quantity (MOQ)?
A: Our MOQ is generally 1 set. However, some low-cost machines may require a higher order quantity.
We want to know:
1. We strongly suggest providing the size and material details of your workpiece for our evaluation. For a more accurate recommendation, sending us a workpiece drawing is highly beneficial. This enables us to suggest the most suitable model for your specific needs.
2. If you require a CIF price, kindly inform us of the port of destination to facilitate the calculation.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}